Installation Instructions; Restoring The Drivers; The Utility Cd - MAXDATA Multimedia Notebook Computer User Manual

Software

INSTALLATION INSTRUCTIONS

RESTORING THE DRIVERS

Your system is supplied in a preloaded condition. This means that all the
data and drivers that the system requires are already on the hard disk. In
case you erase and/or format your hard disk drive, the system drivers are
stored on the Utility CD supplied with the computer. After reinstalling the
operating system (for example, with the Recovery CD), this allows you to
restore your notebook to a usable condition.

THE UTILITY CD

The Utility CD will run automatically after you place it in the drive. If this is
not the case, you can run the CD as follows: select <My Computer"> <CD
Drive> and then the "utility.exe" fi le.
You can select the driver that you want to install in the "Drivers" section.
Recommended: All of the dri vers listed from top to bottom.
In addition, you can later install the advanced functions you require in the
"Utility" section.
When using the Utility CD, please follow the menu instructions.
77