Table of Contents
Advertisement
68
cation Procedure).
WAP profile settings
Up to 5 WAP profiles can be set (may
be barred by the service provider).
The entries may vary depending on
your service provider. To set a new
profile:
G
Select profile.
Open menu.
§Edit§
G
Select profile range and
make your settings/en-
tries field by field.
The entry card is dis-
§Edit§
played.
If necessary, check with your service
provider for details:
Profile
Enter/change name.
name:
WAP Pa-
IP address:
rameters
address.
L
Port:
Homepage:
(p. 39), if not set by the service
provider.
Linger time:
seconds after which a connec-
tion should be ended if no in-
put or data exchange takes
place.
*) depends on the service
provider, if necessary enter
2nd IP address and 2nd
port.
* Enter IP
* Enter port number.
Enter homepage
Enter time in
Setup
CSD set-
tings
(Circuit
Switched
Data)
GPRS
settings
(General
Packet
Radio
Service)
§Save§
Set HTTP profiles
Up to 5 profiles can be defined (may
have been barred by the service pro-
vider). The settings have normally
been carried out by the service pro-
vider in advance. To set a new pro-
file:
G
§Options§
Change settings
Dial-up no.:
Enter ISP
number.
Call type:
Select ISDN or
Analogue.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of
asterisks).
GPRS deactivated:
APN:
Enter the address of
your service provider.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of
asterisks)
The settings are stored
and the profile list is
shown.
Activate the set WAP
profile (p. 41).
Select profile.
Open menu.
Select and confirm.
Yes/No.
Advertisement
Chapters
Table of Contents
