Table of Contents
Advertisement
68
¢
§Menu§
Setup
¢
Connectivity
¢
Select a function:
WAP profile settings
You can set or change up to 5 WAP
profiles (may be barred by the serv-
ice provider). The entries may vary
depending on your service provider.
To set a new profile:
MN
Select a profile.
§Options§
Open menu.
Change settings
Select and confirm.
MN
Select profile range and
make your settings/en-
tries field by field.
The entry card is dis-
§Edit§
played.
If necessary, check with your service
provider for details:
WAP pa-
IP address:
rameters
dress.
~
Port:
Homepage:
(p. 32), if not set by the service
provider.
Linger time:
seconds after which a connec-
tion should be terminated if no
input or data exchange takes
place.
*) depends on your service
provider, if necessary enter
2nd IP address and 2nd port
* Enter IP ad-
* Enter port number.
Enter homepage
Enter time in
Setup
CSD
settings
(Circuit
Switched
Data)
GPRS
settings
(General
Packet
Radio
Service)
§Save§
Note
As an alternative method to set/change a
new profile, you can use the browser menu:
†
More ...
WAP Profiles
Dial-up no.:
Enter ISP
number.
Call type:
Select ISDN or An-
alogue.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of aster-
isks).
activated/deactivated:
vate/deactivate
APN:
Enter the address of
your service provider.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of aster-
isks)
The settings are stored
and the profile list is
shown.
Activate the set WAP pro-
file (p. 34).
Call up the menu.
Select.
Select.
Acti-
Advertisement
Chapters
Table of Contents
