Wap Profile Settings - Siemens C56 User Manual

WAP profile settings

Up to 5 WAP profiles can be set (may
be barred by the service provider).
The entries may vary depending on
your service provider. To set a new
profile:
Select profile.
Open menu.
§Edit§
Select profile range and
make your settings/en-
tries field by field.
The entry card is dis-
§Edit§
played.
If necessary, check with your service
provider for details:
Profile
Enter/change name.
name:
WAP Pa-
IP address:
rameters
address.
Port: * Enter port number.
Homepage:
(p. 40), if not set by the service
provider.
Linger time:
seconds after which a connec-
tion should be ended if no in-
put or data exchange takes
place.
*) depends on the service
provider, if necessary enter
2nd IP address and 2nd
port.
Setup
* Enter IP
Enter homepage
Enter time in
CSD set-
Dial-up no.:
tings
number.
(Circuit
Call type:
Switched
Analogue.
Data)
Login name:
name.
Password:
(shown as a series of
asterisks).
GPRS
GPRS deactivated:
settings
APN: Enter the address of
(General
your service provider.
Packet
Login name:
Radio
name.
Service)
Password:
(shown as a series of
asterisks)
The settings are stored
§Save§
and the profile list is
shown.
Activate the set WAP
profile (p. 42).
71
Enter ISP
Select ISDN or
Enter login
Enter password
Yes/No.
Enter login
Enter password