Accessories - Siemens CT56 User Manual

User group
K K
Setup
§Menu§
K
Select a function.
If offered by the service provider,
this service enables groups to be
formed. These have access for exam-
ple to internal (company) informa-
tion or special tariffs apply to them.
Check with your service provider for
details.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use (phone code, p. 17).
Select group
You may select or add groups other
than the preferred groups (see be-
low). The service provider supplies
you with code numbers for the
groups.
Outgo. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred grp
If activated, only calls within this
standard user group can be made
(depending on the network configu-
ration).
L
Network
Setup

Accessories

K
§Menu§
K
Car Kit
If an original Siemens Car Kit is used
(p. 96) the profile is activated auto-
matically as soon as the phone is in-
serted into the cradle.
User-definable settings
Auto answer
(factory default: off)
Calls are accepted automatically af-
ter a few seconds. Eavesdropping is
possible!
±
®
Auto off
(factory default: 2 hours)
The phone is powered by the car's
power supply. The time between
switching off the ignition and deacti-
vation of the phone can be adjusted.
K
Setup Accessories
Select a function.
Indication on the display.
Switch between the
phone and Car Kit Porta-
ble during a call.
75