Changing The Unit's Settings; Common Procedures; Tuning - Panasonic Diga DMR-EX98V Operating Instructions Manual

Changing the unit's settings

You can change the unit's settings using Setup menu.
The settings remain intact even if you switch the unit to standby.

Common procedures

1
While stopped
Press [FUNCTION MENU].
2
Press [ e , r ] to select "To Others" and
press [OK].
3
Press [ e , r ] to select "Setup" and
press [OK].
Tabs Menus Options
Setup
Remote Control
Clock

Tuning

Power Save
Disc
Quick Start
Picture
DivX Registration
Sound
System Update
Display
Initialize
Connection
VHS TAB
SELECT
Others
RETURN
OK
4
Press [ e , r ] to select the tab and
press [ q ].
5
Press [ e , r ] to select the menu and
press [OK].
6
Press [ e , r ] to select the option and
press [OK].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
Tuning
■ Edit Profi les
You can create four profi les of channels for making viewing and
recording easier. Editing these profi les does not affect the channel
setting itself.
Timer recording may not work correctly if you edit the profi les
during timer recording standby.
Press the "Green" button to select the profi le.
Edit Profi les
All Services
Profi le 1
2 ABC
20 ABC HDTV
Profi le Select Add Add All
SELECT
Page
+
Page
-
RETURN
To add channels to a profi le
1 Press [ e , r ] to select the channel in the "All Services" column
and press the "Yellow" button.
Repeat this step to add other channels.
Press the "Blue" button to add all the available channels to the
profi le. (This is possible only when no channels have been
added to the profi le.)
2 Press [OK] to save the profi le.
To change the order of channels of a profi le
1 Press [ q ]*.
2 Press [ e , r ] to select the channel in the "Profi le" column to move
and press the "Green" button.
3 Press [ e , r ] to select the new position of the channel and press
the "Green" button.
Repeat the steps 2 – 3 to move other channels.
4 Press [OK] to save the profi le.
To delete channels on a profi le
1 Press [ q ]*.
2 Press [ e , r ] to select the channel in the "Profi le" column and
press the "Yellow" button.
Repeat this step to delete other channels.
DVD 1
Off
On
Press the "Blue" button to delete all the channels from the
profi le.
3 Press [OK] to save the profi le.
Deleting a channel from a profi le does not affect the channel
itself. You can still select the channel from the "All Services"
profi le.
To change the name of a profi le in the "Profi le" column
1 Press [ q ]*.
2 Press the "Red" button.
(➡ 52, Entering text)
* When the station name of the "All Services" column is highlighted
■ Auto-Setup Restart
Download from TV
You can restart auto channel setting if set up (➡ 12) fails for some
reason.
Select "Download from TV" when you connect the unit to a Q Link
compatible TV with a fully wired 21-pin Scart cable or a VIERA Link
(HDAVI Control 3) compatible TV with an HDMI cable.
When the confi rmation screen appears
Press [ w , q ] to select "Yes" and press [OK].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [ 2 CH] and [CH 1 ] on the main unit until the
country setting screen or the DVB Auto-Setup screen appears.
All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
■ Settings for Digital Services
Press [OK] to show the following settings.
DVB Manual Tuning
You can set channels manually that the DVB Auto-Setup could not
complete successfully.
1 Press [ e , r ] to select "DVB Manual Tuning" and press [OK].
DVB Manual Tuning
Channel System Western Europe (CCIR) Western Europe (CCIR)
Frequency
DVB CH24
498,0 MHz
Signal Quality
0 10
Signal Strength
0 10
Prog. Channel Service Name Net ID TS ID Quality
START SCAN
OFFSET Change Channel System
CHANNEL RETURN
2 Press [ e , r ] to select the channel you want to set.
3 Press [ w , q ] to adjust the frequency.
The frequency rises and falls in steps of 0.5 MHz.
Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to "Signal Condition" (➡ 72) for signal quality and signal
strength.]
4 Press [OK] to start scan.
The set channel is displayed in the table.
5 Press [EXIT] and press [ 1 2 CH] to check that applicable
channels have been selected.
Add New DVB Services
You can search for newly added terrestrial digital channels to
receive.
1 Press [ e , r ] to select "Add New DVB Services" and press [OK].
The unit starts searching for newly available terrestrial digital
channels. This takes about 5 minutes.
Add New DVB Services
Please wait!
Ch 5 69
Prog. Channel Service Name Net ID TS ID Quality
RETURN: to cancel
RETURN
A message is displayed when the search is fi nished.
"No new services found." is displayed when no new services can
be found.
2 Press [OK] to save the newly found channels.
If there is no picture, press
the "Red" button and select
the correct channel system.
RQT9090
71