Changing The Unit's Settings; Common Procedures; Tuning - Panasonic DMR-EH63 Operating Instructions Manual

Changing the unit's settings

You can change the unit's settings using Setup menu.
≥The settings remain intact even if you switch the unit to standby.

Common procedures

1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "Others" and
press [OK].
3
Press [3, 4] to select "Setup" and
press [OK].
Tabs
Setup

Tuning

Disc
Picture
Sound
Display
Connection
Others
4
Press [3, 4] to select the tab and
press [1].
5
Press [3, 4] to select the menu and
press [OK].
6
Press [3, 4] to select the option and
press [OK].
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
Tuning
Manual Tuning
You can add or delete channels, or change programme positions.
Setup
Manual Tuning
Auto Setup Restart
Download from TV
Tuning
Disc
Picture
Sound
Display
TAB
Connection
SELECT
Others
OK

If the confirmation screen appears, select "Yes" and press [OK] to
§
continue.
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Red" button.
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Green" button.
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press
the "Yellow" button.
2 Press [3, 4] to select the new programme position to which you
want to assign the TV station and press [OK].
Note
≥When the unit sets itself automatically with VIERA Link or Q Link
function ( 10), only deletion of the programme position can be
performed.
≥If you delete programme position of "Host Channel", the GUIDE
Plus+ data is also deleted.
≥This unit does not support SECAM L, L'.
VQT2J12
64
Menus Options
Remote Control DVD 1
Clock
Standby Settings
DivX Registration
Initialize
TAB
SELECT
RETURN
OK
Manual Tuning
Pos Channel CH Pos Channel CH
1 ARD 4 11
2 ZDF 2 12
RETURN
3 N3 5 13
4 HR3 8 14
5 BR3 10 15
6
16
SELECT
7 17
8 18
OK
9 19
RETURN
10 20
Delete Move
Add
To change the tuning settings for individual programme
position
Manual Tuning
Pos Channel CH Pos Channel CH
1 ARD 4 11
2 ZDF 2 12
3 N3 5 13
4 HR3 8 14
5 BR3 10 15
6 16
SELECT 7 17
8 18
OK
9 19
RETURN
10 20
Delete Move
Add
1 Press [3, 4, 2, 1] to select a programme position and
press [OK].
2 Press [3, 4] to select an item and press [1].
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [OK].
Channel To enter or change the Channel of a TV
station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the Channel needs a blank space, select the
blank between "Z" and "¢".
CH To enter newly available TV stations or
change the CH number of an already tuned
TV station
Press [3, 4] or the numbered buttons to enter
the CH number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [OK].
≥Press [1] to return to "Auto".
Video To select the video system type
System Press [3, 4] to select "PAL" or "SECAM" if the
picture lacks colour, and press [OK].
≥Auto
This unit automatically distinguishes PAL and
SECAM signals.
≥PAL
For receiving PAL signals.
≥SECAM
For receiving SECAM signals.
Mono To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound
is distorted due to inferior reception conditions,
or if you want to record the normal (mono)
sound during a stereo, bilingual or NICAM
broadcast, and press [OK].
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and channels.
Press [3, 4] or numbered buttons to enter the
number and press [OK].
≥To find the correct title page for the station,
refer to its Teletext TV guide.
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3 ([EH63])) in step 1 (
≥Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥Title Page (Auto/Off)
Pos 1
Manual
Channel ARD
Tuning
CH 4
Fine Tuning Auto
Video System Auto
Mono
Off
SELECT
Title Page 301
RETURN
RETURN : leave
above).