Connecting A Television With Audio/Video Or S Video Terminals; Connecting A Television With Component Video Terminals; Connecting An Amplifi Er With A Digital Input Terminal; Connecting A Stereo Amplifi Er - Panasonic Diga DMR-EX98V Operating Instructions Manual

Additional connections
* Leave "Yellow" unconnected.
Connecting a television with AUDIO/
VIDEO or S VIDEO terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Television's rear panel
AUDIO IN VIDEO S VIDEO
R L IN
Red White Yellow
Audio/Video cable
(included)
COMPONENT VIDEO OUT
Y P P
B R
Red White Yellow
S VIDEO
R-AUDIO-L VIDEO
OUT
This unit's rear panel
Connecting an amplifi er with a digital
input terminal
To enjoy multi-channel surround sound DVD-Video, connect an
amplifi er with Dolby Digital, DTS and MPEG decoders.
Required setting
"Digital Audio Output" in the Setup menu (➡ 74)
When this unit is connected to an amplifi er with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
"Digital Audio Output" to "Optical Only" in the Setup menu (➡ 75).
In this case audio is only output from the amplifi er not the
television.
Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
You cannot use DTS Digital Surround decoders not suited to DVD.
Amplifi er's rear panel
Optical digital audio
cable
Do not bend sharply
when connecting.
This unit's rear panel
RQT9090
82
Television's rear panel
AUDIO IN VIDEO S VIDEO
IN R L IN
Red White
COMPONENT VIDEO OUT
Y P P
B R
Red White
S VIDEO
R-AUDIO-L VIDEO
OUT
This unit's rear panel
OPTICAL IN
Insert fully
with this
Do not bend
side up.
cable
sharply.
AV OUT
COMPONENT VIDEO OUT
Y P P
B R
S VIDEO
OPTICAL
R-AUDIO-L VIDEO
DIGITAL AUDIO OUT
(PCM/BITSTREAM) OUT
Connecting a television with
COMPONENT VIDEO terminals
IN
S Video
cable
COMPONENT VIDEO OUT
Y P B
R-AUDIO-L VIDEO
OUT
Red White
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡ 96) and provide a purer picture than the
S VIDEO OUT terminal.
Connect to terminals of the same colour.
Required setting
"Progressive" setting in the Setup menu (➡ 75)
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some fl ickering, even if it is
progressive compatible. Turn off "Progressive" if you are concerned
about it (➡ 66). This is the same for multi-system televisions using
PAL mode.
COMPONENT
VIDEO OUT
This unit
Connecting a stereo amplifi er
Amplifi er's rear panel
AUDIO IN
R L
Red White
Audio cable
COMPONENT VIDEO OUT
Y P
B
Red White
R-AUDIO-L
AV 2 (EXT)
Television's rear panel
AUDIO IN
Y
R L
COMPONENT
P
B
VIDEO IN
Red White
P
R
Component
video cable
P R
S VIDEO
AV 2 (EXT)
This unit's rear panel
CRT
DO NOT
Progressive output
P
R
This unit's rear panel
S VIDEO
VIDEO
OUT
Audio/Video
cable
(included)
COMPONENT
VIDEO IN