Copying A Video Cassette - Panasonic Diga DMR-EX98V Operating Instructions Manual

Advanced Copy
3
When the top menu is displayed
Press [ e , r , w , q ] to select the title
you want to start copying, and press
[OK].
My favorite
01
Chapter 1
03
Chapter 3
05
While playing in order, all the titles after the selected title are
recorded until the set time. (After the last title on the disc has
fi nished playing the top menu is recorded until the set time is
reached.)
To return to the previous screen
Press [RETURN].
To stop copying
Press [ g ].
You can also press and hold [RETURN] for 3 seconds to stop copying.
If stopped partway, copying will be up to that point.
Note
The screen on the right is recorded at the
beginning.
The content is recorded as 1 title from the start
of copy to the end.
If play does not begin automatically or if the top
menu does not display automatically, press [ q ]
(PLAY) to start.
Even if you copy a high quality video/audio DVD, the original
picture and audio quality cannot be exactly replicated.
If you want to copy a title from a fi nalised DVD-RW (DVD Video
Recording format), create a copying list and then copy (➡ 58,
Copying using the copying list–Advanced Copy).

Copying a video cassette

VHS HDD RAM -R -RW(V) +R +RW
Preparation:
Insert a disc and video cassette that you can use for copying (➡ 17).
Confi rm that there is enough remaining disc space.
When copying an NTSC tape to a DVD, change the "TV System" to
"NTSC" in the Setup menu (➡ 75). This unit cannot record NTSC
signals to discs that already have PAL signal recordings. (However,
both types of programmes can be recorded onto the HDD.)
After performing steps 1−5 ("Format" is automatically set to "VHS-
Video") (➡ 58, Copying using the copying list−Advanced Copy)
1
Set "Copy Time".
If you are not going to change the setting (➡ step 2).
Setting the unit to copy according to the set time
1 Press [ e , r ] to select "Copy Time", then press [ q ].
2 Press [ e , r ] to select "Time Setting", then press [OK].
Setting the unit to copy all the content on the video cassette
3 Press [ e , r ] to select "Off", then press [OK].
4 Press [ w ] to confi rm.
Setting the copying time
3 Press [ e , r ] to select "On", then press [OK].
4 Press [ e , r ] to select "Copy Time", then press [OK].
Copy
Cancel All
1
Copy Direction
VHS DVD
2
Copy Mode
VHS-Video SP
3
Copy Time
5 Press [ w , q ] to select "Hour" and "Min.", then press
[ e , r ] to set the recording time.
6 Press [OK].
7 Press [ w ] to confi rm.
You can also set the recording time with the numbered buttons.
You cannot set a recording period longer than 25 hours.
VHS -R -RW(V) +R
Press [ w , q ] to select "Copy & Finalise" or
"Copy Only", then press [OK].
If "Copy & Finalise" is selected
After fi nalising, the discs become play-only and you can
also play them on other DVD equipment. However, you can
no longer record or edit.
RQT9090
60
01/02
02
Chapter 2
04
Chapter 4
06
Hour Min.
2 00
Set the time a few minutes
longer.
2
Press [ e , r ] to select "Start Copying",
then press [OK].
3
Press [ w ] to select "Yes", then press
[OK] to start copying.
Copying continues until the set time even if the playback of
the programme you wish to copy fi nishes. Note that copying
is automatically stopped when the tape reaches the end or
the remaining capacity of the copy destination is fi lled.
To stop copying
Press and hold [RETURN] for 3 seconds.
(You cannot stop while fi nalising.)
To return to the previous screen
Press [RETURN].
Note
To play DVD-R, DVD-RW (DVD-Video format) and +R on other
players, it is necessary to fi nalise them after copy.
About FR mode
When "Time Setting" is set to "Off" in step 1 (➡ left):
The recording mode is automatically selected by estimating the
remaining capacity of the disc for copying of only the recorded
parts in the video cassette (unrecorded parts will not be recorded).
When you press [OK] to start copy, the tape is automatically fast-
forwarded to the end and then fast-rewound to the beginning
before the copying is actually started. It may take time to start
copy. If the remaining capacity of the disc is insuffi cient, the
copying will be stopped in the middle.
The recording is divided into titles every time the tape index
signals are detected.
When "Time Setting" is set to "On" in step 1 (➡ left):
The recording mode is automatically determined by estimating the
remaining capacity of the disc for copying of the contents
equivalent to the recording time set from the start point of the
copying on the video cassette (unrecorded parts will also be
recorded).
The recording is not divided into titles.
SECAM recorded VHS tapes cannot be played on this unit.
To copy a SECAM recorded VHS tape (➡ 28)