One Touch Copy; Hdd Dvd Or Vhs; Vhs Hdd Or Dvd - Panasonic Diga DMR-EX98V Operating Instructions Manual

One Touch Copy

HDD DVD or VHS
HDD RAM -R -R DL -RW(V) +R +R DL +RW VHS
The title or playlist being played will automatically be copied.
Copying will start from the beginning of the title or playlist being
played, regardless of the current position.
Preparation
Copy to:
DVD: insert a disc that you can use for copying (➡ 17).
VHS: insert a video cassette with an accidental erasure prevention
tab (➡ 17).
Confi rm that there is enough remaining disc or tape space.
Select the recording mode.
[ w HDD]
HDD VHS
COPYING indicator
1
Play the desired title or playlist to
copy (➡ 35, 49).
You can also copy even after pressing [ h ] to pause
playback.
2
Press and hold [ w HDD] or [HDD q ]
on the main unit for about 3 seconds
or more (until "START" on the unit's
display terminates fl ashing).
The "COPYING" indicator on the main unit lights.
Check if copy starts properly.
* Remaining copy time appears when copying by normal
speed.
When the fi nalize confi rmation screen appears
-R -R DL -RW(V) +R +R DL
Do you want to fi nalize the disc
after copying completes ?
Finalizing is to allow the disc to be played on
other DVD players. The disc becomes play-only.
If you press [ * REC] on the main unit, the disc will automatically
be fi nalized after copying completes.
– After fi nalizing, the discs become play-only and you can also
play them on other DVD equipment.
However, you can no longer record or edit.
If you press [ q ] (PLAY) on the main unit, you can start copying
without fi nalizing.
If you press [ g ] on the main unit, you can cancel to copy.
Note
You cannot copy playlists with a play time more than 8 hours.
When you copy a playlist, it will become a title in the destination
drive.
RQT9090
56
[HDD q ]
HDD DVD
Current copy status (38% has been copied)*
Copy
Press REC to start fi nalizing after
copying completes.
Press PLAY to start copying only.
Press STOP to cancel copying.
VHS HDD or DVD
VHS HDD RAM -R -RW(V) +R +RW
Copying automatically starts from the current position on the video
cassette.
Preparation
Copy to:
DVD: insert a disc that you can use for copying (➡ 17).
Confi rm that there is enough remaining HDD or disc space.
Select the recording mode.
Copy from:
VHS: insert the video cassette containing the programme to be
copied (➡ 17).
[ w VHS]
VHS HDD
[VHS q ]
VHS DVD
COPYING indicator
While both VHS and HDD or DVD are stopped
Press and hold [ w VHS] or [VHS q ] on the
main unit for about 3 seconds or more
(until "START" on the unit's display
terminates fl ashing).
The "COPYING" indicator on the main unit lights.
Check if copy starts properly.
When the fi nalize confi rmation screen appears (➡ left)
When copy without fi nalize
When copying starts, the selected drive automatically changes to
HDD. Therefore, the current state of the HDD drive appears on the
unit's display.
(When the HDD is stopped, the display
on the right appears. The elapsed DVD
recording time is not displayed.)