Copying Still Pictures; Copying All The Still Pictures On The Usb Memory-Copy All Pictures; Copying New Still Pictures On The Sd Card-Copy New Pictures; Copying Using The Copying List - Panasonic Diga DMR-EX98V Operating Instructions Manual

Copying still pictures

HDD RAM USB SD
SDHC Memory Cards used for recording with this unit can only be
used with other SDHC Memory Card-compatible equipment.
SDHC Memory Cards cannot be used with equipment that is only
compatible with SD Memory Cards.
You cannot copy pictures recorded to DVD-R, DVD-R DL or CD-R/
CD-RW.
Still pictures copied from USB memories or SD cards are grouped
by the shooting date in the HDD or DVD-RAM.
Copying all the still pictures on the
USB memory—Copy All Pictures
or
USB HDD RAM
1
While stopped
Insert the USB memory (➡ 17).
The menu is automatically displayed.
USB device
Play Video (DivX)
Play Pictures (JPEG)
Copy Pictures (JPEG)
Play Music (MP3)
Copy Music (MP3)
Update CD database on HDD
SELECT
OK
2
Press [ e , r ] to select "Copy Pictures
(JPEG)" and press [OK].
Copy All Pictures
Copy from
Copy to
3
Press [ e , r ] to select "Copy to" and
press [ w , q ] to select the drive.
4
Press [ e , r , w , q ] to select "Copy"
and press [OK].
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
Note
The structure of folders on the USB memory may not be the same
at the copy destination.
If the space on the destination drive runs out or the number of
fi les/folders to be copied exceeds the maximum (➡ 16), copying
will stop partway through.
You cannot copy the information about the picture rotation.
Copying new still pictures on the SD
card—Copy New Pictures
or
SD HDD RAM
This unit saves information about imported still pictures. Therefore, if
still pictures are imported from the same SD card, then only new
still pictures will be imported.
1
While stopped
Insert the SD card (➡ 17).
The menu is automatically displayed.
SD Card
Play Pictures (JPEG)
Copy Pictures (JPEG)
SELECT
OK
RQT9090
62
RETURN
USB
HDD
RETURN
2
Press [ e , r ] to select "Copy Pictures
(JPEG)" and press [OK].
Copy New Pictures
Copy from
SD CARD
Copy to HDD
3
Press [ e , r ] to select "Copy to" and
press [ w , q ] to select the drive.
4
Press [ e , r , w , q ] to select "Copy"
and press [OK].
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
Note
This unit saves the information on up to 12,000 still pictures and
30 SD cards. If additional still pictures are imported, then the older
information will be deleted.
If the space on the destination drive runs out or the number of
fi les/folders to be copied exceeds the maximum (➡ 16), copying
will stop partway through.
You cannot copy the information about the picture rotation.

Copying using the copying list

HDD RAM SD
1
While stopped
Press [FUNCTION MENU].
2
Press [ e , r ] to select "To Others" and
press [OK].
3
Press [ e , r ] to select "Advanced
Copy" and press [OK].
The menu is automatically displayed.
Copy
Cancel All
Source SD CARD
1
Copy Direction
SD CARD HDD
Destination HDD
2
Copy Mode
PICTURE High Speed
3
Create List
0
If you are not going to change the registered list, press [ r ]
several times (➡ step 7).
4
Set the copy direction.
If you are not going to change the copying direction, press
[ r ] (➡ step 5).
1 Press [ e , r ] to select "Copy Direction" and press [ q ].
2 Press [ e , r ] to select "Source" and press [OK].
3 Press [ e , r ] to select the drive and press [OK].
4 Press [ e , r ] to select "Destination" and press [OK].
5 Press [ e , r ] to select the drive and press [OK].
The same drive as the copy source can be selected.
6 Press [ w ] to confi rm.
5
Set the copy mode.
If you are not going to change the recording mode, press
[ r ] (➡ step 6).
1 Press [ e , r ] to select "Copy Mode" and press [ q ].
2 Press [ e , r ] to select "Format" and press [OK].
3 Press [ e , r ] to select "PICTURE" and press [OK].
"Recording Mode" is automatically set to "High Speed".
4 Press [ w ] to confi rm.