Error Messages - Pioneer AVH-P5350DVD Owner's Manual

Additional Information
Symptom Cause
The image is Some discs fea-
ture a signal to
extremely un-
clear/distorted prohibit copying.
and dark dur-
ing playback.
Video CD
Symptom Cause
The PBC (play- The Video CD
back control) being played
menu cannot does not feature
be called up. PBC.
Repeat play The Video CD
and track/time being played fea-
search are not tures PBC.
possible.
iPod
Symptom Cause
The iPod does The cables are in-
not operate correctly con-
correctly. nected.
The iPod version
is old.
Action (Refer-
ence page)
Since this unit is
compatible with
the analog copy
generation man-
agement system,
when playing a
disc that has a sig-
nal prohibiting
copying, horizontal
stripes or other im-
perfections may
appear when
viewed on some
displays. This is
not a malfunction.
Action
This operation is
not available for
Video CDs that do
not feature PBC.
This operation is
not available for
Video CDs that fea-
ture PBC.
Action
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
Update the iPod
version.
Bluetooth audio/telephone
Symptom Cause
The sound There is a call in
from the Blue- progress on a
tooth audio Bluetooth con-
source is not nected cellular
played back. phone.
A Bluetooth-con-
nected cellular
phone is cur-
rently being oper-
ated.
A call was made
with a Bluetooth-
connected cellu-
lar phone and
then immediately
terminated. As a
result, communi-
cation between
this unit and the
cellular phone
was not termi-
nated properly.
Multi-channel processor
Symptom Cause
There is no The optical
sound. cables are not
The volume connected cor-
level will not rectly.
rise.
Audio output is The digital output
2-channel setting is set to
audio even Linear PCM.
though multi-
channel audio
is selected.

Error messages

When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
Appendix
Action
The sound will be
played back when
the call is termi-
nated.
Do not operate the
cellular phone at
this time.
Reconnect the
Bluetooth connec-
tion between this
unit and the cellu-
lar phone.
Action (Refer-
ence page)
Connect the cables
correctly.
Normally, set the
digital output set-
ting to Stream.
(Page 60)
91
En