Selecting The Video Format; Selecting The Area Group; Setting The Video Signal - Pioneer AVH-P5350DVD Owner's Manual

Dvd av receiver
Table of Contents

Advertisement

Menu operations
! Ground – When the polarity of the con-
nected lead is negative while the gear shift
is in REVERSE (R) position
! Off – When a rear view camera is not con-
nected to this unit

Selecting the video format

You can switch the video output format of
REAR MONITOR OUTPUT between NTSC and
PAL.
1
Display the system menu.
Refer to Introduction of menu operations on
page 43.
2
Touch Video Output Format on the sys-
tem menu to select the video output for-
mat.
NTSC—PAL
Note
You can switch the video output format only for
the source from this unit.

Setting the video signal

When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
! As this function is initially set to Auto, the
unit will automatically adjust the video sig-
nal setting.
However, the screen may turn black or
images may not be displayed properly
when Auto has been selected and the re-
ception is weak. Normally, select the appro-
priate TV signal.
! About your country TV signal, consult with
your nearest Pioneer dealer.
! You can operate this function only for the
video signal input into the AV input.
1
Display the system menu.
Refer to Introduction of menu operations on
page 43.
2
Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting items are displayed.
! AV – Adjusts the AV video signal
! AUX – Adjusts the AUX video signal
! Camera – Adjusts the camera video signal
! TV – Adjusts the TV video signal
3
Touch c or d to select the desired
video signal appears.
Auto—PAL—NTSC—PAL-M—PAL-N—
SECAM

Selecting the area group

1
Select the TV source.
Refer to Basic operations of this unit on page
11.
2
Display the system menu.
Refer to Introduction of menu operations on
page 43.
3
Touch TV Country Group on the func-
tion menu.
4
Touch c or d until the desired area
group appears.
Country1 (CCIR channel)—Country2 (IN
channel)—Country3 (CHN channel)—
Country4 (U.K. channel)—Country5 (OIRT
channel)—Country6 (AUSTRALIA channel)—
Country7 (SAF channel)
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the car's interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
WARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto EQ
while driving.
CAUTION
! Thoroughly check the conditions before per-
forming auto EQ as the speakers may be da-
maged if these functions are performed when:
— The speakers are incorrectly connected.
(For example, when a rear speaker is con-
nected as a subwoofer output.)
Section
13
65
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avh-p6350bt

Table of Contents