Table of Contents
Advertisement
05
Listening to your system
• ExtraPower – The Extra Power mode gives
additional energy and depth to a stereo
source by using the surround speakers in
addition to the front speakers.
If you have selected Frt. Movie or Frt. Music,
you will achieve best results by turning each
surround speaker about 60º towards the
closest wall. With ExtraPower, orient the
surround speakers in the same direction as the
front speakers (towards the listening position).
60º
Frt. Movie / Frt. Music
* Illustration shows the HTD-645DV
Front left
speaker
Surround
left speaker
60º
Frt. Movie / Frt. Music
* Illustration shows the HTD-641DV
Adjusting the Advanced and Front
Surround effect level
You can emphasize or reduce the effect of the
Advanced and Front Surround modes as you
like. You can set the effect level for all modes
independently.
1
With one of the Advanced or Front
Surround modes active, press SOUND
MODE.
2
Use the
to select 'Effect'.
46
En
ExtraPower
Front left
speaker
Surround
left speaker
Extra Power
(cursor left/right) buttons
3
Use the
(cursor up/down) buttons
to adjust the effect level.
The effect level can be adjusted from 10 (min)
to 90 (max).
4
Press ENTER to confirm.
Listening in stereo
You can listen to any source—stereo or
multichannel, analog or digital—in stereo.
When playing a multichannel source, stereo
sound is created by downmixing all channels
to the front left/right speakers and the
subwoofer.
SURROUND
•
Press SURROUND repeatedly until
'Stereo' shows in the display.
Any active Advanced Surround or Front
Surround mode is canceled.
Listening with headphones
When headphones are connected, only the
Stereo (default) and Phones Surround (virtual
surround sound for headphones) modes are
available.
When you disconnect them it reverts to the
previous mode.
•
With headphones connected, press
ADVANCED or FRONT SURROUND to select
'Phones Surround' or SURROUND to select
'Stereo'.
Hide quick links:
Advertisement
Table of Contents
