Table of Contents
Advertisement
12
Additional information
Chapter 12
Additional information
Optional system settings
These settings are accessed by using the
System Setup menu while in standby.
1
Switch the system into standby.
2
Press SYSTEM SETUP (SHIFT + HOME
MENU).
3
Use the
to choose the setting you want to adjust
then press ENTER.
The current setting is shown for each option as
you cycle through the display. See below for a
full list and description of each.
4
Use the
to adjust the setting.
5
Repeat steps 2 and 3 to make other
settings.
6
Press ENTER to confirm.
74
En
SYSTEM SETUP
ENTER
SHIFT
(cursor left/right) buttons
(cursor up/down) buttons
System Setup menu options in standby
Below are all the available settings in the setup
menu. The first setting in each section is the
default. See also the notes in each section for
additional information about the settings.
Wireless speaker setting
See Using the wireless speaker system on
page 41.
Child lock setting
The Child Lock feature is useful when you've
set the wake-up timer and don't want the
system switched on before it activates.
• Lock On – Makes the front panel buttons
and controls inoperative.
• Lock Off – Restores regular use of the
front panel buttons and controls.
Clock format setting
Specifies how the clock is displayed:
• 12-Hour – Sets the clock to show in 12-
hour format in the display.
• 24-Hour – Sets the clock to show in 24-
hour format in the display.
TV attenuator setting
If the source connected to the TV analog input
is producing distortion through the speakers,
the attenuator will reduce the signal level.
• ATT 6dB – Reduces the signal level by 6dB.
• ATT 10dB – Reduces the signal level by
10dB.
• ATT Off – No attenuation
Hide quick links:
Advertisement
Table of Contents
