Placing The Speakers - Pioneer XV-HTD640 Operating Instruction

Connecting up
6 When you're finished connect the
power cord to a household power outlet.
• HTD-645DV only – Before doing this, plug
the supplied power cord into the wireless
speaker AC IN inlet (see below).

Placing the speakers

Note that the HTD-641DV does not include
surround speakers. If not connected, simply set
up your speakers using the Standard surround
5-spot setup shown below, disregarding the
surround speakers in the diagram.
Depending on the size and characteristics of
your room, you can choose to place your
speakers in one of two ways using this system.
Note that the following setups are possible
when you are using the the wireless speaker as
a second stereo system (see Using the wireless
speaker system on page 41 for more on this).
• Standard surround 5-spot setup – This is
a standard multichannel surround sound
speaker setup for optimal 5.1 channel
home theatre sound.
System
Front left
unit
Surround
left
Power outlet
Sub-
Front right
woofer
Center
Surround
right
Center
Front left
Subwoofer
Listening position
Surround
left
• Front surround 3-spot setup – This setup
is ideal when rear surround speaker
placement isn't possible or you want to
avoid running long speaker cables in your
listening area. Use this setup together with
the Front Surround modes to take
advantage of wall and ceiling reflections
for a very realistic surround effect.
Surround
left
System
unit
Front
left
Center
Front
left
Subwoofer
Surround
left
Listening position
Front right
Surround
right
Surround
right
Sub-
Front
woofer
right
Center
Front
right
Surround
right
02
13
En