Adjusting The Sound; Adjusting The Bass And Treble; Adjusting The Effect Level; Boosting The Bass Level - Pioneer S-DV505 Operating Instructions Manual

Adjusting the sound

Adjusting the bass and treble

• Default setting (U.S. model only):
TREBLE: 0db
BASS: 0dB
• Default setting (all other models):
TREBLE: –2dB
BASS: 0dB
To help you get the sound you want you can
increase or reduce the bass and treble.
1 Press SOUND MODE.
Make sure that the MIDNIGHT and QUIET
modes are off when you do this.
2 Use the (cursor left/right)
/
buttons to select BASS or TREBLE.
3 Use the (cursor up/down)
/
buttons to adjust the sound.
The bass and treble can be adjusted from -3
to +3.
4 Press ENTER to confirm.

Adjusting the effect level

• Default setting: 70
You can adjust the effect level of the
Advanced Surround mode to get the sound
that you want.
1 Press SOUND MODE.
Make sure that the ADVANCED SURROUND
mode is on when you do this.
2 Use the (cursor left/right)
/
buttons to select EFFECT.
3 Use the (cursor up/down)
/
buttons to adjust the effect level.
The DSP effect level can be adjusted from 10
(min) to 90 (max).
4 Press ENTER to confirm.
• This doesn't work with the 5-Channel
Stereo or the Virtual SB mode.

Boosting the bass level

• Default setting: OFF
If you want to bring up the low end for
certain kinds of music or sound sources, you
can use the bass mode to do so.
• Press BASS MODE repeatedly to
choose an option that fits the source
you're listening to.
• MUSIC - Can be used with music to give
a deeper bass sound
• CINEMA - Good for action movies or
movies with lots of sound effects
• P. BASS - Can be used with music
sources to bring the beat of the music
(or soundtrack) to the forefront
• OFF
• You can't use the bass mode when the
headphones are connected.
Not applicable to the European model:
• The default setting for multi-channel (5.1
channel) listening is CINEMA.
08
47
En