Using The Answering System - Panasonic KX-TG8100FX Operating Instructions Manual

TG8100-8120FX(e).book Page 34 Wednesday, August 9, 2006 3:13 PM
I
Answering System Features (KX-TG8120 only)
Note:
L If you have stored the remote access
code, you can turn on answering system
by calling the unit even when it is turned
off. This call may be answered before the
ring delay feature of the night mode (page
21) activates. You need to select "30
sec." for activating the ring delay
feature.

Using the answering system

remotely
1
Dial your phone number from a touch
tone phone.
2
After the greeting message starts, enter
your remote access code.
L The unit will announce the number of
new messages.
3
Enter remote commands.
Note:
L You can hang up at any time.
L If less than 5 minutes of recording time is
available, the unit will announce the
remaining recording time after the last
message is played back.
34
Remote commands
Key Remote command
Repeat message (during
{1}
playback)
Skip message (during
{2}
playback)
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record greeting
{7}
message
Stop (recording,
{9}
playback)
Turn answering system
{0}
off
Erase this message
{*}{4}
(during playback)
Erase all messages
{*}{5}
Erase greeting message
{*}{6}
(during greeting
message playback)
End remote operation
{*}{#}
(or hang up)
*1 If pressed within the first 5 seconds of
a message, the previous message will
be played.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
Dial your phone number from a touch
tone phone.
2
Let the phone ring 9 times.
L A long beep will be heard.
3
Enter your remote access code within 10
seconds after the long beep.
L The greeting message is played back.
*1