Sms Settings - Panasonic KX-TG8100FX Operating Instructions Manual

TG8100-8120FX(e).book Page 29 Wednesday, August 9, 2006 3:13 PM
2
"Receive List" i #
3
Press {^} or {V} to select a message.
L Messages which have already been
read are indicated by a "Q", even if
they were read using another handset.
L To erase a message, press G. i
"Yes" i #
4
Press # to read the message content.
Note:
L To call the message sender, press {C}
or {s}.
Replying to a message
1
While reading a received message,
press ".
2
"Reply" i #
3
Enter a message (page 41). i #
4
Edit the destination phone number
and/or press #.
5
Continue from step 5, "Writing and
sending a new message", page 27.
Editing/forwarding a message
1
While reading a received message,
press ".
2
"Edit Message" i #
3
Continue from step 3, "Writing and
sending a new message", page 27.
Erasing received messages
1
While reading a received message,
press ".
2
"Erase" i #
L To erase all messages, select "Erase
All". i #
3
"Yes" i # i {ih}
SMS (Short Message Service)
X
Storing the sender's number in
the handset phonebook
1
While reading a received message,
press ".
2
"Add Phonebook" i #
3
Continue from step 3, "Adding entries to
the handset phonebook", page 16.
Editing the sender's number
before calling back
1
While reading a received message,
press ".
2
"Edit and Call" i #
3
Edit the number. i {C} / {s} / #

SMS settings

If the base unit is reset to its default settings
(page 24), the following SMS-related
settings will be reset. The contents of the
receive and send lists will be erased.
SMS settings
SMS on/off (default:
*1
"Off")
Message Centre 1
Message Centre 2
PBX line access number
(default: "Off")
*1 If you set the unit's region setting (page
24) to "CZ" or "SK", the default setting is
"On".
Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (4 digits
max.) so that SMS messages are sent
properly. When sending SMS messages to
entries in the handset phonebook or redial
Page
page 27
page 27
page 27
page 29
29