Power Off Link - Panasonic Viera TX-P42GT30E Operating Instructions Manual

Q-Link
Preparations
•
Connect the DVD Recorder / VCR with the following logos :
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC (a trademark of Metz Corporation)", "Easy Link (a trademark of Philips Corporation)",
"Megalogic (a trademark of Grundig Corporation)", "SMARTLINK (a trademark of Sony Corporation)"
•
Q-Link connection (p. 95)
•
Use fully wired SCART cable.
•
Set up the DVD Recorder / VCR. Read the manual of the recorder.
•
Q-Link terminal setup in the Setup Menu
•
Download preset - channel, language, country settings
Features available
Preset download
Channel, language, country settings can be downloaded to the recorder.
•
DVB-S and DVB-C channel settings cannot be downloaded.
•
To download settings
[Download] (p. 41) or [Auto Setup] (p. 48) or "Auto Setup" - when first using the TV (p. 13, 14)
Direct TV Recording
Recording the current programme in DVD Recorder / VCR immediately.
DIRECT TV REC
■
To stop recording
Unlock the tuner
Press EXIT to unlock and stop recording
Power on link and Easy playback
Set Power on Link [On] in the Setup Menu to use this function
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment are activated, the TV is turned
on and input mode is switched automatically so that you can view the content. (Only when the TV is in Standby mode.)

Power off link

Set Power off Link [On] in the Setup Menu to use this function
When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the videocassette or disc is not
active.)
•
This function will work even if the TV enters Standby mode automatically by auto power standby function.
Note
•
Some recorders are not applicable. Read the manual of the recorder.
[AV1 out] (p. 40)
- What you see is What you record
•
Available conditions :
Picture source
Analogue
DVB
AV (watching recorder's tuner)
AV (watching recorder's external input)
AV (watching TV's external input)
•
When Direct TV Recording is performed, the recorder is automatically turned on if it is in
Standby mode.
•
Changing channel or turning off the TV is available while the recorder is recording from its
own tuner.
•
Changing channel is not available while the recorder is recording from the TV tuner.
EXIT
Tuner Locked
"Preset download" (see below)
[Power on Link] (p. 40)
[Power off Link] (p. 40)
Mode Recording from
TV TV monitor out
AV Recorder's tuner
TV TV monitor out
AV Recorder's tuner
Recorder's
AV
external input
AV TV monitor out
97