Panasonic Viera TX-P42GT30E Operating Instructions Manual page 37

Menu Item
Reversal Film Effect
Eco Mode
P-NR
3D-COMB
3D Settings
Screen Display
Intelligent Frame
Creation
24p Smooth Film
3D Refresh Rate
Film Cadence
Detection
Resolution Enhancer
Side Panel
Adjustments / Configurations (alternatives)
Provides the picture effect such as the reversal film [Off] / [On]
•
This function is available when [Viewing Mode] is set to [Photo].
Automatic Brightness Control function
Adjusts picture settings automatically dependent on ambient lighting conditions
[Off] / [On]
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts
of a picture [Off] / [Min] / [Mid] / [Max]
Makes still or slow moving pictures look more vivid [Off] / [On]
•
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be
seen. Set to [On] to display sharper and more accurate colours.
•
For PAL or NTSC signal reception only
•
Not valid on 3D, RGB, Component, HDMI and Media Player
Adjusts and sets to view 3D images (p. 32)
Turns the screen off when you select [Off ]
[Off] / [On]
•
The sound is active even if the screen turns off.
•
Press any buttons (except Standby) to turn the screen on.
•
This function is effective in reducing power consumption when listening to the sound
without watching the TV screen.
Automatically compensates the picture frame rate and removes juddering movements
to make the images smooth [Off] / [Mid] / [Max]
•
Depending on the contents, images may be noisy. To prevent the noise, change the
setting.
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of network service operations.
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Mid] / [Max]
•
This is available only for 24p signal input and displayed instead of [Intelligent Frame
Creation].
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of network service operations.
Reduces juddering and flicker noises of the 3D images [Auto] / [100Hz]
Automatically makes the film source movie images clear [Off] / [On]
•
This function is available for the interlaced signal (except when [Viewing Mode] is set
to [Game]).
Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect mode is set
to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].
•
Not valid on Media Player and network service operations
Increases the brightness of the side panel [Off] / [Low] / [Mid] / [High]
•
The recommended setting is [High] to prevent panel "image retention".
37