Panasonic Viera TX-P42GT30E Operating Instructions Manual page 41

Menu Item
Standby Power Save
Intelligent Auto
Standby
Download
Child Lock
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel
Message
Signal Condition
Antenna System
LNB Configuration
Add TV Signal
Adjustments / Configurations (alternatives)
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption [Off] / [On] (p. 99)
•
This function is available when [VIERA Link] is set to [On] and [Power off Link] is set
to [On].
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 99)
•
This function is available when [VIERA Link] is set to [On].
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
•
DVB-S and DVB-C channel settings cannot be downloaded.
Locks a channel / AV input to prevent access to it (p. 58)
Creates list of favourite DVB-S channels (p. 49)
Skips the unwanted DVB-S channels or edits DVB-S channels (p. 50)
Automatically sets the DVB-S channels received in the area (p. 46)
Sets the DVB-S channels manually (p. 51)
Updates DVB-S Channel List while keeping your settings (p. 52)
Selects whether to give a notification message when a new DVB-S channel is found
[Off] / [On] (p. 52)
Checks the DVB-S signal condition (p. 52)
Sets the antenna system to use plural LNBs for receiving several satellites
[One LNB] / [MiniDiSEqC] / [DiSEqC1.0] / [Single Cable] (p. 45)
•
This TV supports DiSEqC Version 1.0.
Selects the satellite for each LNB (p. 46)
Adds the TV mode
•
This function is available if you skip any modes to tune in [Auto Setup] for first using
the TV.
•
To operate, refer to the "Auto Setup" operations for first using the TV (p. 13, 14).
41