Panasonic Viera TX-P42GT30E Operating Instructions Manual page 57

■
To change a timer programming event
Select the programme to be changed
select
access
■
To cancel a timer programming event
Select the programme to be deleted
Note
•
Check that the LED is orange. If not, timer programmes are not active or not stored.
•
Timer Programming reminder messages will remain displayed until one of the following occurs :
• You press the OK button to view the programme or the EXIT button to cancel the reminder.
• The timer programming event that the reminder is set for ends.
•
"!" identifies that any timer programming events have overlapped. [Ext Rec.] and [USB HDD Rec.] are given priority over
[Reminder]. As for the overlapped two or more [Ext Rec.] / [USB HDD Rec.], the first timer programming event starts and
finishes as programmed. The next timer programming event can then start.
•
The recording of Timer Programming will automatically change to the programmed channel 10 seconds before the start
time.
•
To stop recording the timer programming event directly prior to the start time, it may be necessary to stop the recorder
manually.
•
The recording of Timer Programming will be performed even if the TV is in REW LIVE TV recording (p. 70) or Pause Live TV
recording (p. 100). In this case, these recordings will be cancelled.
Correct as necessary (p. 56)
(red)
■
To record with subtitles (if available)
Select the programme to record with subtitles
•
Each time pressed :
auto
■
To cancel a timer programming event
temporarily
Select the programme to be cancelled
•
Each time pressed :
cancel
(yellow)
off
(blue)
stop cancelling
57