Panasonic Viera TX-P42GT30E Operating Instructions Manual page 103

Speaker control [Speaker Selection]
You can control the theatre speaker with this TV remote control (point the remote control at the TV's signal receiver).
•
If you cannot operate, check the settings and the equipment
"Summary of Q-Link and VIERA Link features" (p. 95, 96), "Preparations" (p. 98)
Note
•
These functions may not work properly depending on the connected equipment.
•
Image or sound may not be available for the first few seconds when input mode is switched.
•
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier. Read the
manual of the equipment.
•
"HDAVI Control 5" is the newest standard (current as of December, 2010) for HDAVI Control compatible equipment. This
standard is compatible with conventional HDAVI equipment.
•
To confirm this TV's version of HDAVI Control
Display [VIERA Link Menu]
1
Select [Speaker Selection]
2
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Set to [Home Cinema] or [TV]
3
select
store
[Home Cinema]
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it is in
Standby mode and the sound is from theatre speakers connected to the equipment.
•
Volume up / down
•
Mute
•
The sound of TV speakers is mute.
•
When the equipment is turned off, TV speakers will be active.
[TV]
TV speakers are active.
Multi-channel sound
If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect
with HDMI cable and Optical digital audio cable (p. 96), and then select [Home Cinema]. If your
Amplifier has "HDAVI Control 5" function, you can connect only with HDMI cable. In this case,
connect your Amplifier to the TV's HDMI2 terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cable from
the DIGA Recorder to the Amplifier (p. 96).
[System Information] (p. 44)
Start
Start
Recorder
Home Cinema
select
access
103