Installing The Ferrite Core - Panasonic Viera TX-P42GT30E Operating Instructions Manual

Example 3
TV, DVD Recorder / VCR and Set top box
Rear of the TV
Terrestrial
AC 220-240 V
aerial
50 / 60 Hz
Mains lead
■
Connecting to the network environment (Network connections)
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment.
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection).
•
Setup of the network connection will start after the tuning (when first using the TV)
Rear of the TV
Wired connection
Less
than
10 cm
Note
•
For more information of the network connections
Note
•
To watch 3D contents
•
Connect to the TV's AV1 for a DVD Recorder / VCR supporting Q-Link (p. 97).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI
cable (p. 104).
•
Q-Link and VIERA Link connection
•
Please also read the manual of the equipment being connected.
•
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise,
distortion of image / sound may occur or operation of other equipment may be interfered.
12
Connecting DVD Recorder / VCR and Set top box
RF adaptor
(supplied)
Wireless connection
Wireless LAN Adaptor and Extension cable
"Optional accessories" (p. 6)
•
Connect to the USB 1, 2 or 3 port.
LAN cable
Less
than
10 cm
Internet
environment
(p. 29)
(p. 95, 96)
Fully wired HDMI
compliant cable
SCART adaptor
(supplied)
Fully wired
SCART cable
RF cable
RF OUT
RF cable
RF IN
Ferrite core - Large size (supplied)

Installing the Ferrite core

Pull back the tabs Wind the cable
(in two places) twice
(p. 85)
Set top box
Fully wired
SCART cable
DVD Recorder or VCR
(p. 14 - 16)
Internet
environment
Access point
Press the cable
through and close
Cable