Conference Calls - Panasonic KX-TG8280FX Operating Instructions Manual

TG8280FX(e).book Page 46 Tuesday, September 11, 2007 1:52 PM
Multi-unit Operation

Conference calls

3 people can establish a conference call.
Conference call with 2 outside
calls
While you are talking with an outside
caller, you can make or answer a 2nd
call on the other line, and then combine
the calls to establish a conference call.
Handset
1
During an outside call, press
{HOLD} 2 times.
2
To answer a 2nd call, press P or
Q.
To make a 2nd call, press P or
Q, then dial the phone number.
3
When the 2nd call is connected,
press O to make a conference
call.
L To hang up only one line, press
P or Q for the party with
which you want to continue
talking.
L To put both lines on hold, press
{HOLD}. To talk with only one
caller, press P or Q for the
party with which you want to
continue talking. To resume both
lines, press O.
Base unit
1
During an outside call, press
{HOLD}.
2
To answer a 2nd call, press {LINE 1}
or {LINE 2}.
To make a 2nd call, press {LINE 1}
or {LINE 2}, then dial the phone
number.
46
3
When the 2nd call is connected,
press {CONF} to make a
conference call.
L To hang up only one line, press
{LINE 1} or {LINE 2} for the party
with which you want to continue
talking.
L To put both lines on hold, press
{HOLD}. To talk with only one
caller, press {LINE 1} or
{LINE 2} for the party with which
you want to continue talking. To
resume both lines, press
{CONF}.
Conference call with an
outside call and an intercom
call
While you are talking with an outside
caller, one more extension can join the
conversation and establish a conference
call.
Handset
1
During an outside call, press {INT}
to put the call on hold.
2
To page the base unit, press {0}.
To page another handset, enter its
extension number ({1} – {6}).
3
When the paged party answers,
press O to make a conference
call.
L To leave the conference, press
{ih}. The other 2 parties can
continue the conversation.
Base unit
1
During an outside call, press
{INTERCOM} to put the call on hold.
L When only 1 handset is
registered, the base unit pages
the handset automatically.