Battery Charge - Panasonic KX-TG8280FX Operating Instructions Manual

TG8280FX(e).book Page 13 Tuesday, September 11, 2007 1:52 PM

Battery charge

Place the handset on the base unit for
about 7 hours before initial use.
When charging, "Charging" will be
displayed.
When the batteries are fully charged,
"Charge Completed" will be
displayed.
L The charge indicator lights up when
the handset is placed on the base unit.
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset and base unit with a soft, dry
cloth once a month. Clean more often
if the unit is subject to the exposure of
grease, dust, or high humidity.
Preparation
Battery level
Battery icon Battery level
High
1
Medium
2
Low
3
L When flashing:
Needs to be
charged.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating
time
In continuous use 12 hours max.
In continuous 150 hours
standby mode max.
Note:
L It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L Even after the handset is fully
charged, the handset can be left on
the base unit without any ill effect on
the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit and let it
charge for at least 7 hours.
13