Administrator Name And Password - Panasonic DP-C406 Function Manual

Administrator Name and Password

The user name and password for the system administrator can be set in Authentication Setting on
page 12 when User Authentication is enabled for the first time. Use the following procedure if you
subsequently wish to change the system administrator name or password.
1
Press the Function key.
2
Select "General Settings".
3
Select "5-9" tab, and then select "09
Key Operator Mode".
1 2
4
Enter the Key Operator password (8
digits), and then select "OK".
1
The default password is "00000000".
To change the password, select "80 Key
Operator Password" in the General
Settings (Key Operator Mode), and then
enter the new password.
5
Select "40 - 59" tab, and scroll the
screen, and then select "49
Administrator Name".
1 3
2
2
31