Rightfax Server Setting - Panasonic DP-C354 Operating Instructions Manual

RightFax Server Setting

This enables, or disables the RightFax server.
Note:
Password Transmission is not available if the RightFax Server setting is set to "Valid".
When the User Authentication function is enabled, you must login to the machine to change settings.
See the following sections for details about how to login.
See "Administrator Login" on page 28 for Logging in as the system administrator.
See "Login Procedure" on page 9 for Logging in as a user.
The machine will generate the Email Address in the format shown below, and then send the Email to the RightFax Server.
Ex: "Ifax=5551212/name=Jane/"<rightfax@pana.com>
Fax Number Station Name
To change the Email Address of the RightFax Server, set "Fax Server Mail Address".
(User Parameter No.39, Fax/Email Setting)
This setting is displayed only when the RightFax Server setting is set to "Valid".
Press the Function key.
Select "Fax/Email Settings".
Select "04 Key Operator Mode".
26
Email Address of the RightFax Server
Enter the Key Operator's password (8-digit),
and then select "OK" .
Note:
Default password is "00000000".
To change this password, select "85 Key Operator
Password" in the General Setting (For Key Operator),
and then re-enter the new password.
Select "01 Fax Parameters".