Authentication Setting
The system administrator can enable/disable the User Authentication for each function (copying, faxing,
scanning, and printing).
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
14
Enter the Key Operator's password (8-digit),
and then select "OK".
Note:
The default password is "00000000".
To change the password, select "85 Key Operator
Password" in the General Settings (Key Operator
Mode), and then enter the new password.
Select "60 - 79" tab, and scroll the screen, and
then select "75 User Authentication".
3
Note:
"76 ID Timeout", "77 Log-on Attempts", and "79
Lockout Time" are displayed only when "75 User
Authentication" is set.
Select the function where authentication is
required, and then select "OK".