Problem Solving; Troubleshooting - Panasonic DP-2310 Operating Instructions Manual

Problem Solving

Troubleshooting

Unit Does Not Operate
Does the display light?
Does the Energy Saver key flash (or light)
and displays are turned OFF?
(See page 48)
Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Does the Add Staples indicator and message
appear on the display?
Does the Add Paper indicator and message
appear on the display? (
Does the paper misfeed indicator and
message appear on the display? (
Does E#-## indicator and message appear
on the display?
The machine would not accept the next job
during operation, instructed job would not be
accepted for long time period or job would not
be completed.
Light Copies
Does the exposure indicator say "LIGHTER"?
Does the Add Toner indicator and message
appear on the display? (
70
Check
)
)
)
Action
Check if the Power Switches (Main Power
Switch on the back and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Press Energy Saver key on the control panel.
Perform actions in accordance with each
message.
Add Staples (See page 12)
Remove all jammed staples. (See page 13)
Add paper. (See page 10)
Remove the misfed paper. (See pages 14 - 17)
Turn the Main Power Switch on the Back and
the Power Switch on the Left Side of the
machine to the OFF position, then back ON
again. If the error code does not clear, call
your Service provider.
Turn the Power Switch Off/On.
Touch the "DARKER" button.
Replace the Toner Bottle.
(See pages 12, 13)