Answering Machine B; Switching On And Off; Recording A Message; Duration Of Recording - Philips voice dect User Manual

Answering
machine b
The recording capacity is 30 minutes.
Your answering machine is factory-programmed
with a recorded outgoing message. If you want
to record your own outgoing message, proceed as
described under "Recording a message".
v In case of a long term power failure re-
corded messages, etc. will be deleted!

Switching on and off

Activate or deactivate your answering machine
with ON/OFF. If you have switched on the an-
swering machine you will see the b symbol on
the display of your fax machine.

Recording a message

1 Hold down REC for two seconds. Press
REC again, until you hear a confi rmation
tone. Keep a distance of 20 cm and start to
record your message.
2 A black bar indicates you how much memory
is available for the outgoing message (max. 20
seconds).
3 Stop recording by pressing REC or STOP.
4 The new answering message is automatically
replayed. By pressing u you can change
the volume of the message.
5 To hear the message again, press REC for a
while (two seconds) and then PLAY.

Duration of recording

1 Select MENU, 51 and OK.
2 Press u to choose between 30, 60, 120
seconds or the AUTO mode (unlimited re-
cording time). Please note that AUTO mode
is not available in all countries.
3 Confi rm with OK.

Listening to messages

1 If the PLAY button fl ashes on your fax ma-
chine, this means that messages have been
recorded for you. New messages are indicated
on your cordless handset by the b symbol.
Press PLAY to listen to the fi rst message. The
date and time the message was received and
the number of the caller will be displayed.
2 The next message will be replayed if you press
PLAY while listening to any message.
3 You can switch between messages by entering
the number of the message you want while
the messages are being played. For example,
enter 1 for the fi rst message.
4 After listening to your messages PLAY will
stay on until all messages have been erased.

Play back volume

1 Press u on the fax machine while playing
back messages. The current volume setting
will be displayed.
2 Press u to obtain the desired volume.

Deleting messages

Single messages
1 If you want to delete the message which is
currently being played, press C on the fax
machine.
2 You will be asked on the display if you really
want to delete this message. Press C or OK.
All messages
1 Press C on the fax machine after having lis-
tened to all messages.
2 If you actually want to delete all messages,
press C or OK. To interrupt the deleting
process press STOP.
29