Silvercrest KH 6525 Operating Instructions Manual page 19

During the programmed playback the notice PROGRAM appears in the display.
To delete the programmed playback press twice, during playback, the
button on the front panel of the DVD player or on the remote control.
Note:
If you are not sure what number a title and/or chapter to be programmed has
then select the corresponding chapter, during playback of the film, with the
SKIP FWD SKIP BWD
buttons and
on the remote control to superimpose all information from the inserted DVD/VCD/
S VCD onto the television screen. Here you will find, amongst others, the current
title and chapter numbers.
On this topic see also the section "Superimpose disc information".
Superimpose disc information
Note:
This function may not be available on all DVDs/VCDs/S VCDs! If you attempt
to execute a function that is not available, the symbol
television screen.
With this function you can superimpose all the available information from
a DVD/VCD/S VCD inserted into the DVD player onto the television screen
during playback.
• For this, during playback, press the
On the television screen will be superimposed:
With DVDs:
• the current title number/the total number of titles
• the current chapter number/the total number of chapters
• the played back so far time in hours, minutes and seconds (TITLE ELAPSED)
• the time to the end of the film in hours, seconds and minutes (TITLE REMAIN)
• the played back so far time of the chapter in hours, minutes and seconds
(CHAPTER ELAPSED)
• the time to the end of the chapter in hours, seconds and minutes
(CHAPTER REMAIN)
With VCDs/S-VCDs:
• the current title number/the total number of titles
• the played so far time of the current playback title on the VCD/SVCD in
hours, minutes and seconds (SINGLE ELAPSED)
• the time to the end of the current playback title in hours, seconds and minutes
(SINGLE REMAIN)
To stop display of the disc information press repeatedly the
until the notice DISPLAY OFF appears on the television screen.
Repeat function for DVDs, VCDs, S-VCDs and audio CDs
With the repeat function you can...
... in the case of DVDs, selectively repeat title, chapter or the entire DVD.
... in the case of VCDs/S VCDs individual titles and/or the entire VCD/S VCD
repeatedly playback.
... in the case of audio CDs, playback repeatedly a particular track and/or
the entire CD.
To switch on repeat playback...
REPEAT
• Press the button several times during playback.
The repeat symbol appears in the display with one of the following
notifications:
CHAPTER Select CHAPTER to continuously repeat the currently playing
back chapter until repeat playback is switched off or play
back is cancelled by pressing the
STOP
DISPLAY
and susequently press the
is displayed on the
DISPLAY
button on the remote control.
DISPLAY
button
STOP
button twice.
TITLE Select TITLE to continuously repeat the currently playing
back title until repeat playback is switched off or playback
is cancelled by pressing the
ALL Select ALL to continuously repeat all available titles on the
disc, thus the entire disc, until playback repeat is switched
off or playback is cancelled by pressing the
twice.
button
To switch off repeat playback press the
back, until no more notifications appear on the television screen.
Repeat function with MP3/WMA/MPEG/ JPEG/Xvid discs
During playback press the
repeat functions (the set function appears in the display):
RANDOM
Random playback of the titles on the disc and/or the data carrier.
SINGLE
One time playback of the current title/image.
REPEAT ONE
Endless repeat of the current title/image.
REPEAT FOLDER
Repeat the current folder.
ALL
Repeat all titles on the disc and/or data carrier.
Repeat sequence (A–B)
With this function you can repeat playback of a favourite sequence within
a chapter of the current playback disc.
To do this ...
• During playback press the A – B button on the remote control as soon as the
desired sequence starts to playback.
• Press the A – B button again as soon as the end of the desired sequence is
played back. Pay careful attention to the fact that the start and finish of
the sequence must be located within a chapter.
AB appears on the television screen.
Repeat playback of the selected sequence begins immediately without you
PLAY/PAUSE
having to press the
peat until you press the A – B button again in order to switch off the function.
Setting playback volume
VOL +
Press the button on the remote control during playback to increase play
back volume or the
Dimmer
DIMMER
Press the button on the remote control to change the DVD player's
display brightness in three levels.
To switch playback sound to mute (MUTE)
To switch the playback sound to mute press the
control during playback of DVDs, VCDs/S VCDs, audio CDs and CD Rs/CD RWs
with MP3 or WMA data. MUTE is displayed on the television screen.
When you want to switch the playback sound back on press the
VOL +
again or the and
level is displayed on the television screen.
- 17 -
STOP
REPEAT
button repeatedly, during play
REPEAT
button several times to apply the following
A appears on the television screen.
button. The sequence will continuously re
VOL –
button to reduce playback volume.
MUTE
(
VOL –
buttons. MUTE OFF or the corresponding volume
button twice.
STOP
button
) button on the remote
MUTE
( ) button