Additional Information; Adjust Brightness Of Display Panel; Turn On Or Off Led Light; Set Alarm Timer - Philips MBD7020 User Manual

9 Additional
Information
Adjust brightness of display
panel
1
In standby mode, press DIM repeatedly
to select different levels of brightness for
the display panel.

Turn on or off LED light

1
In power-on mode, press and hold DIM
to turn on or off the LED light at the
bottom of the unit and at the volume
knob.

Set alarm timer

Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP
/TIMER.
» [TIMER SET] (set timer) appears
briefly. Then [SELECT SOURCE]
scrolls, followed by an alarm source
for selection.
2
Press VOL +/- to select an alarm source:
DISC, TUNER, USB DIRECT or DOCK.
3
Press SLEEP /TIMER to confirm.
»
The hour digits begin to blink.
4
Press VOL +/- to set the hour.
5
Press SLEEP /TIMER to confirm.
»
The minute digits begin to blink.
6
Press VOL +/- to set the minute.
7
Press SLEEP /TIMER to confirm.
»
The volume level indicator begins to
blink.
8
Press VOL +/- to set the volume level,
then press SLEEP /TIMER to confirm.
»
An alarm icon is displayed.
Note
•
In standby mode, press SLEEP /TIMER repeatedly to
activate/deactivate the alarm timer.
•
When the alarm sounds, you can press
adjust volume.
•
If Disc/USB/Dock is selected as the alarm source,
while no disc is inserted or no USB/iPhone/iPod
connected, the system switches to the tuner source
instead.

Set the sleep timer

1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
»
The unit turns off automatically after
the set period of time.

Update software

For software updates to enhance
performance, check the current software
version of this product to compare with the
latest software (if available) at the Philips
website.
1
Press .
2
Select [Setup], and press OK.
3
Select [Advanced] > [Version Info.], and
press OK.
VOL +/- to
EN 35