Use Philips Easylink - Philips MBD7020 User Manual

1
Connect a Philips Wi-Fi USB adapter
(named WUB1110, sold separately) to the
Wi-Fi port on the back of this product.
2
Turn on this product and the router.
Internet
Tip
•
The wireless performance can vary due to
bandwidth connection, network traffic and some
environmental effects, such as surrounded by metal
panel or heavy concrete, radio interference and
coverage distance.
Install the network connection
For the first time you connect the network,
install the network connection.
1
Set up a wired or wireless network.
2
Press to display the home menu.
3
Select [Setup] and press OK.
4
Select [Network Setup], and press .
5
Select [Network Installation], and press
OK.
20 EN
Video Setup
Audio Setup
Network Setup
EasyLink Setup
Preference
Wi-Fi Advanced
R R
LINE OUT AUX IN
6
Router
•

Use Philips EasyLink

This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use one single
remote control to control EasyLink-compliant
devices that are connected through HDMI
connectors.
•
Network Installation
View Network Settings
View Wireless Settings
Follow the on-screen instructions to
complete the network installation.
»
After the network installation
completes, you can access the
services: BD-Live and software
updates.
Tip
You can check the status of the wired or wireless
connection of this product (see "Adjust settings"
> "Network Setup" >[View Network Settings] or
[View Wireless Settings]).
Note
To enable the EasyLink feature, you must turn on
the HDMI CEC operations on the TV and on other
devices connected to TV. Refer to the TVs/devices
manual for details.