Related Manuals for Philips MBD7020
Summary of Contents for Philips MBD7020
- Page 1 Register your product and get support at www.philips.com/welcome MBD7020 EN User manual...
-
Page 3: Table Of Contents
Find the TV input Use the Home menu 10 Troubleshooting Navigate a menu Select a menu display language 11 Glossary Set up a network Use Philips EasyLink Play Play a disc Play from a USB device Play video Play photo Play music... -
Page 4: Important
Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in This product is in compliance with the accident, injury or damage. -
Page 5: Mains Fuse (Uk Only)
Mains fuse (UK only) This information applies only to products with Your product contains batteries covered by a UK mains plug. the European Directive 2006/66/EC, which cannot be disposed with normal household This product is fitted with an approved waste. molded plug. -
Page 6: Copyright Notice
HD, and DTS-HD Master Audio | Essential Open source software and the DTS logos are trademarks of DTS, Philips Electronics Hong Kong Ltd. hereby Inc. Product includes software. DTS, Inc. All offers to deliver, upon request, a copy of the Rights Reserved. - Page 7 setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. ® ® DivX , DivX Certified and associated logos are registered trademarks of DivX, Inc. and are used under license. HDMI, and HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
-
Page 8: Your Blu-Ray Component Hi-Fi System
• USB flash drive www.philips.com/welcome. If you contact Philips, you will be asked for the Region codes model and serial number of this product. The model number and serial number are on the You can play discs with the following region bottom of this product. -
Page 9: Product Overview
Product overview Main unit SOURCE • Turn on this product or switch to • Search backward or forward. Eco Power standby mode. • Tune to a radio station. • When EasyLink is enabled, press and hold for at least three seconds •... -
Page 10: Remote Control
j Display panel • Turn on this product or switch to k Disc compartment Eco Power standby mode. • When EasyLink is enabled, press and hold for at least three seconds • Headphone socket. to turn all connected HDMI CEC m MP3 LINK compliant devices to standby. - Page 11 • Skip to the previous or next title, • Access the home menu of this chapter, or track. product. • Skip to the previous/next title or x DISC/POP-UP/MENU chapter. • BD: Access or exit the pop-up menu. • DVD: Access or exit the disc menu. •...
-
Page 12: Connect
3 Connect Optional connections: • Route audio to other devices • HDMI-compliant AV receiver/ amplifier Make the following connections to use this • Multi-channel AV amplifier/receiver product. • Digital AV amplifier/receiver • Analog stereo system • FM antenna Preparations • USB flash drive •... -
Page 13: Connect Video/Audio Cables
Screw the black (-) connector to secure • If this product connects to a TV compatible with 1080p or 1080p/24Hz, Philips recommends HDMI the cable. category 2 cable, also known as High Speed HDMI Repeat steps 2-6 for the right speaker cable, for optimal video and audio output. - Page 14 Option 2: Connect to the composite Connect to an HDMI-compliant AV video jack receiver/amplifier LINE OUT AUX IN LINE IN VIDEO IN VIDEO OUT HDMI IN LINE OUT AUX IN Connect an HDMI cable (not supplied) to: • HDMI jack on this player. LINE OUT •...
-
Page 15: Route Audio From Other Devices
Connect a coaxial cable (not supplied) to: • COAXIAL jack on this product. • the COAXIAL/DIGITAL input jack on the device. LINE OUT Connect an analogue stereo system LINE OUT AUX IN AUDIO IN AUX IN LINE OUT AUX IN •... -
Page 16: Connect Fm Antenna
files. • Connect a USB device only to the jack on the front panel of this product. • Philips does not guarantee compatibility with all USB devices. • Press USB/DOCK to select the audio output of your connection. -
Page 17: Connect Power
4 Get started Connect power Caution Caution • Use of controls or adjustments or performance • Risk of product damage! Ensure that the power of procedures other than herein may result in supply voltage corresponds to the voltage printed on hazardous radiation exposure or other unsafe the back of the unit. -
Page 18: Set Clock
To deactivate the demonstration mode: Switch to normal standby mode Press on the main unit again. • Press to switch the unit to normal standby mode. » The clock (if set) is displayed. Find the TV input To switch to Eco Power Standby mode: Press to turn on this player. -
Page 19: Select A Menu Display Language
Philips Wi-Fi USB adapter (named WUB1110). • The Wi-Fi USB Adapter (WUB1110) is not included. To purchase this adapter, visit shop.philips.com. If the Philips online shop is not available in your country, please contact Philips customer service. For contact details, go to www.philips.com/support. -
Page 20: Use Philips Easylink
Connect a Philips Wi-Fi USB adapter Network Installation Video Setup (named WUB1110, sold separately) to the View Network Settings Audio Setup Wi-Fi port on the back of this product. View Wireless Settings Network Setup Turn on this product and the router. - Page 21 , select [Setup], then press OK. Select [EasyLink Setup], then press . • [One Touch Play] and [One Touch Note Standby] functions are turned on by • default. Philips does not guarantee interoperability with all HDMI CEC devices. Select [System Audio Control] > [On].
-
Page 22: Play
Note After you pause or stop a disc and no button is pressed within 15 minutes, this product automatically • Philips does not guarantee compatibility with all USB switches to standby. devices. • Not all digital cameras are supported. Digital cameras that require PC programme installation are not supported. -
Page 23: Display Menu
Button Action Pause play. • If the PBC setting is off, the VCD/SVCD skips the Start or resume play. menu and starts play from the first title. To display the menu before play, turn on the PBC setting (see Stop play. “Adjust settings”... - Page 24 Press the Navigation buttons ( ) to Repeat play for a specific section shift the subtitle, and press OK. During play, press MODE/OPTIONS. » The play options menu is displayed. Select [Repeat A-B] in the menu, and • Subtitle shift is not supported for DivX video with press OK to set the starting point.
-
Page 25: Play Photo
Press to start slideshow play. ® Play DivX video DivX video is a digital media format that Note retains high quality despite a high rate of • It may require longer time to display the disc content compression. on the TV if there are a large number of songs/ Insert a disc or USB device that contains photos compiled onto one disc. -
Page 26: Play Music
Play MP3/WMA music Note • To create a musical slideshow, you must store the MP3/WMA is a type of compressed audio file MP3/WMA and JPEG files on the same disc or USB (files with .mp3, .wma extensions). device. Insert a disc or USB device that contains the MP3/WMA music. -
Page 27: Adjust Settings
6 Adjust settings • [4:3 Letterbox] – For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen. • [4:3 Panscan] – For 4:3 screen TV: full- height display with the trimmed sides. • [16:9 Widescreen] –... -
Page 28: Audio Setup
[Picture Settings] Note Select a predefined set of picture color • Applicable only to Dolby encoded DVD-video or settings. BD-video. • [Standard] – Original color setting. • [Vivid] – Vibrant color setting. • [Cool] - Soft color setting. [HDMI Audio] •... -
Page 29: Network Setup
To exit the menu, press [Network Installation] [EasyLink] Install the network connection. This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) [View Network Settings] protocol. You can use one single remote control Display the information for the current to control all EasyLink-compliant devices that are network status. -
Page 30: Preference Setup
You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink [Disc Menu] controls. See the TV/devices manual for details. • Philips does not guarantee 100% interoperability Select a language for disc menu. with all HDMI CEC compliant devices. Note •... -
Page 31: Advanced Setup
BD-Live discs). [Software Update] Update the software of this product (if a [Display Panel] latest version is available on Philips website) to Select a brightness level of the front panel enhance the performance of this product. display. •... -
Page 32: Tune To Fm Radio Stations
find optimal • This information is needed for you to check if a latest reception. software version is available at the Philips website so that you can download and install on this player. Program radio stations automatically... -
Page 33: Program Radio Stations Manually
Program radio stations Set RDS clock manually You can use time signal broadcast together with the RDS signal to set the clock of the unit Note automatically. • You can program a maximum of 40 preset radio Tune to a RDS radio station that stations. -
Page 34: Adjust Volume Level And Sound Effect
8 Adjust volume Mute sound level and sound During play, press to mute/resume sound. effect Listen through headphone Adjust volume level Plug a headphone into the socket on During play, press VOL +/- to increase/ the unit. decrease the volume level. Select a sound effect Note •... -
Page 35: Additional Information
(if available) at the Philips website. Press VOL +/- to select an alarm source: Press DISC, TUNER, USB DIRECT or DOCK. -
Page 36: Care
Specifications Note Update software via USB • Specifications are subject to change without notice Go to www.philips.com/support to check if the latest software version is available for this product. Video Download the software into a USB flash •... - Page 37 • MP3 LINK cable • Quick start guide • User manual (CD-ROM) Optional accessory • A wireless Philips USB adapter(named WUB1110, sold separately) • Multimedia connections: Wi-Fi 802.11b/g/n • Connectivity: Rear connection (USB) • Ambient temperature: 5 deg C to 40 deg C.
-
Page 38: Troubleshooting
Make sure that the TV supports high- check the following points before you request definition video. service. If you still have a problem, register your product and get support at www.philips. com/welcome. Sound No sound or poor sound Main unit •... - Page 39 The operation is not possible. EasyLink feature does not work. • Ensure that this product is connected to the Philips brand EasyLink TV and the[EasyLink]in the menu is set to [On]. Unable to access BD-Live feature. • Check the network connection or make sure that the network has been set up (see “Get started”...
-
Page 40: Glossary
11 Glossary DivX Video-On-Demand This DivX Certified ® device must be registered in order to play DivX Video-on- Demand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to Aspect ratio vod.divx.com with this code to complete the Aspect ratio refers to the width to height registration process and learn more about... - Page 41 JPEG Region code A very common digital still picture format. A system that allows discs to be played only A still-picture data compression system in the region designated. This unit only plays proposed by the Joint Photographic Expert discs that have compatible region codes. You Group, which features small decrease in image can find the region code of your unit on the quality in spite of its high compression ratio.
- Page 42 © 2011 Koninklijke Philips Electronics N.V. All rights reserved. MBD7020_12_UM_V1.0...