Timer Recording (G- Code ® System) - Philips DVDR3365 User Manual

Timer recording (G-
System)
This is a simple programming system for
DVD recorders. To use it, enter the
G- ® programming number
CODE
associated with your television
program. You can fi nd this number in
your TV listings magazine.
All the information needed by the DVD
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
B
Press TIMER on the remote control.
The timer schedule list appears.
Timer Schedule
Source RecMode Date
1
2
3
4
5
6
C
Press OK to confi rm.
Or, press key to go to the next
available empty slot and press OK.
The G-
CODE
Enter the G-
CODE
number for the show you wish to
record or select CANCEL for manual
timer recording. To go back to timer
schedule press [TIMER].
D
Use the numeric keypad 0-9 to enter
®
the G- programming number for
CODE
the show you wish to record. (e.g. :
5-312-4 or 5,312 4, key in '53124').
TIPS: Ensure that there is suffi cient space available on the DVD±R/±RW before recording.
You have to fi nalize the DVD±R, before it can be played on other players, see page 35.
dvdr3365_75_eng_16752.indd 31 dvdr3365_75_eng_16752.indd 31
®
CODE
Start End
®
System menu appears.
programming
Recording
To clear the G-
CODE
number, press CLEAR on the remote
control.
To cancel the G-
CODE
use keys to select
menu and press OK.
E
To confi rm your entry, select
the menu and press OK.
The system will store the timer entry
and return to the timer editor menu.
If the channel number of the TV channel
has not been assigned to the
programming number, you will have to
manually key in the channel number that
is assigned to the G-
the instructions on the TV.
F
Press TIMER to exit the menu.
G
Insert a DVD±R/±RW into the DVD
recorder.
H
Press STANDBY-ON to turn off the
DVD recorder.
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
If you ignore the warning message,
the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
The ' ' icon will light up on the
TIMER
display panel if a timer recording is set.
(continued)
®
programming
®
programming ,
in the
CANCEL
in
CONFIRM
®
code. Follow
CODE
31
2005-11-02 2:21:38 PM 2005-11-02 2:21:38 PM