Timer Recording (Video Plus+ System) - Philips DVDR3305/05B User Manual

Recording
Timer recording (VIDEO
®
Plus+ System)
This is a simple programming system for
DVD recorders. To use it, enter the
VIDEO Plus+ ® programming number
associated with your television
programme. You can fi nd this number in
your TV listings magazine.
All the information needed by the DVD
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
B
Press TIMER on the remote control.
The timer schedule list appears.
Timer Schedule
Source RecMode Date
1
2
3
4
5
6
C
Press OK to confi rm.
Or, press key to go to the next
available empty slot and press OK.
The VIDEO Plus+
appears.
VIDEO Plus+ System
Enter the VIDEO Plus+ programming
number for the show you wish to
record. Press CANCEL to return
to timer schedule or [TIMER] to
exit timer.
5
Confirm
D
Use the numeric keypad 0-9 to enter
the VIDEO Plus+
for the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in '53124').
TIPS: Ensure that there is suffi cient space available on the DVD±R/±RW before recording.
You have to fi nalise the DVD±R before it can be played on other players, see page 36.
32
1_dvdr3305_05_eng_16862.indd 32 1_dvdr3305_05_eng_16862.indd 32
(continued)
Start End VPS
®
System menu
Cancel
OK
®
programming number
To clear the VIDEO Plus+
number, press CLEAR on the remote
control.
To cancel the VIDEO Plus+
programming, use
in the menu and press OK.
CANCEL
E
To confi rm your entry, select
the menu and press OK.
The system will store the timer entry
and return to the timer editor menu.
If the channel number of the TV channel
has not been assigned to the
programming number, you will have to
manually key in the channel number that
is assigned to the VIDEO Plus+
Follow the instructions on the TV.
F
Press TIMER to exit the menu.
G
Insert a DVD±R/±RW into the DVD
recorder.
H
Press STANDBY-ON to turn off the
DVD recorder.
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
If you ignore the warning message,
the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
The ' ' icon will light up on the
TIMER
display panel if a timer recording is set.
®
programming
®
keys to select
in
CONFIRM
®
code.
2005-10-31 5:00:05 PM 2005-10-31 5:00:05 PM