Timer Recording; About Timer Recording; Timer Recording (G- Code ® System) - Philips DVDR3400 User Manual

About timer recording

Use the timer recording to automatically
start and stop a recording at a later
date/time. The recorder will tune to the
right program channel and begin
SOURCE
recording at the specifi ed time.
TOOLS
DISC MENU
With this recorder, you can schedule up
to 20 recordings at a time. During
timer recording, changing the channel
that is being recorded is not possible.
There are two ways to program a

timer recording

– Using the G-
CODE
– Using manual timer schedule.
REC MODE REC MODE
TIMER
TIPS:
Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on
another player, fi nalize the disc. See "Playing your recordings on other DVD players(DVD±R only)".
USB TV/DVD OPEN/CLOSE
ç
CLEAR REPEAT
SELECT
PLAY/PAUSE
®
system.
TIMER TIMER EDIT EDIT G-CODE G-CODE
Timer Recording
Timer recording (G-
System)
This is a simple timer programming
system. To use it, enter the G-
programming number associated with
your television program. You can fi nd
this number in your TV listings magazine.
All the information required by this
recorder for programming is contained in
the programming number.
A
Turn on the TV to the correct viewing
channel for the recorder (e.g. 'EXT', '0',
'AV'.)
B
Press G-CODE on the remote control.
®
The G- System menu appears.
CODE
G-Code System
Enter the G-Code programming
number for the show wish to record.
CONFIRM
C
Use the numeric keypad 0-9 to enter
®
the G- programming number for
CODE
the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in '53124'.)
To clear the G-
CODE
number, press CLEAR on the remote
control.
To cancel the G-
CODE
keys to select
and press OK.
®
CODE
®
CODE
CANCEL
OK
®
programming
®
programming, use
in the menu
CANCEL
31