Progressive/ Interlace; Video Output Format; Restore Factory Settings - Philips DVDR3365 User Manual

DVD System Menu Options

Progressive/ Interlace

Progressive scan delivers a higher picture
quality than the standard interlaced TV
channel scan. It only works when you
have connected the DVD recorder
Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise,
the image may not appear or will be
distorted. Please check your TV user
manual for more information.
A
In 'System Menu-General', use
to select { Progressive / Interlaced }
and press OK.
{ Interlaced }
Select this to enable interlaced feature.
{ Progressive }
Select this to enable progressive scan feature.
B
Use keys to select a setting and
press OK to confi rm.
Helpful Hints:
– Follow the instructions shown on the TV to
confi rm the selection (if any).
– If a blank/distorted TV screen appears,
wait for 10 seconds for the auto recovery.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
50
dvdr3365_75_eng_16752.indd 50 dvdr3365_75_eng_16752.indd 50
(continued)

Video Output Format

The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
A
In 'System Menu-General', use
to select { Video Output Format } and
press OK.
{ NTSC }
keys
Select this if the connected TV has the NTSC
colour system. It will change the video signal of
a PAL disc and output it to NTSC format.
{ PAL }
Select this if the connected TV has the PAL
colour system. It will change the video signal of
an NTSC disc and output it to PAL format.
B
Use keys to select a setting and
press OK to confi rm.
Helpful Hint:
– If a blank/distorted TV screen appears,
wait for 15 seconds for the auto recovery.

Restore Factory settings

This will restore all the settings of this
DVD Recorder, except for the PIN code.
Restore Factory settings can only be
changed when there is no disc in the
disc tray.
A
In 'System Menu-General', use
to select { Restore Factory Settings }
and press OK.
A warning message will appear
B
Select
OK
to abort, then press OK to
CANCEL
confi rm.
keys
keys
in the menu to proceed or
2005-11-02 2:21:41 PM 2005-11-02 2:21:41 PM