Timer Recording
About timer recording
Use 'Timer Recording' to automatically
start and stop a recording at a later date/
time. The recorder will tune to the right
program channel and begin recording at
the specifi ed time.
With this recorder, you can pre-program
up to 20 recordings.
To make a timer recording, your
recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The mode of record quality, see
"Before Recording – Default
Recording Settings."
SELECT
TIMER
TIPS:
Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD.
44
Timer recording (VCR
®
Plus+
This is a simple programming system for
recorders. To use it, enter the PlusCode
programming number associated with
your television program. You can fi nd
this number in your TV listings magazine.
All the information needed by the
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
If you are recording directly to a
DVD disc, insert the DVD recordable
disc before proceeding to step
B
Press TIMER on the remote control.
The timer schedule list appears.
Source Rec Mode Date
1
2
3
OK
4
5
6
C
Use
available empty slot and press OK.
The VCR Plus+®. System setup menu
appears.
Enter the PlusCode programming
number for the show you wish to
record or select MANUAL for manual
timer recording. To go back to timer
schedule press [RETURN].
System)
Timer Schedule
Start
End Rec To
keys to highlight the next
CONFIRM
MANUAL
OK
OK
B
.