Basic Connections - Dvd Recorder; Step 2: Connecting The Video Cable; Option 1: Using A Video (Cvbs) Cable; Option 2: Using An S-Video Cable - Philips DVDR3365 User Manual

Basic Connections - DVD recorder

Option 1
Step 2: Connecting the
video cable
This connection enables you to view the
disc playback from the DVD recorder.
You only need to choose one of the
options below to make your video
connection.
Option 1: Using a CVBS cable
(good picture quality)
Use the supplied audio/ video cables
(yellow plug) to connect the VIDEO
(CVBS) -OUT2 jack on the DVD
recorder to the video input jack (or
labeled as A/V In, Video In or Composite)
on the TV.

Option 2: Using an S-Video cable

(excellent picture quality)
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) jack on the
DVD recorder to the S-Video input
jack (or labeled as Y/C or S-VHS) on
the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
dvdr3365_75_eng_16752.indd 11 dvdr3365_75_eng_16752.indd 11
OR
OR
Option 2
Option 3
TV
S-V ID E O
IN
AU D IO
O U T
V ID E O IN
Option 3 : Using a Component
Video cable (best picture quality)
A
Use the component video cables (red/
blue/green - not supplied) to connect the
Y Pb Pr -OUT1 jacks on the DVD
recorder to the corresponding
component video input jacks (or labeled
as Y Pb/Cb Pr/Cr or YUV) on the TV.
B
If your TV accepts Progressive Scan
signal, see page 50 for detailed
Progressive Scan set up.
IMPORTANT!
The progressive scan video quality is
only available through Y Pb Pr
connection and a progressive TV is
required. It is strongly advised to
complete the DVD recorder
installation fi rst, before enabling the
progressive scan feature.
(continued)
11
2005-11-02 2:21:36 PM 2005-11-02 2:21:36 PM