Deleting Home Theatre Equipment Remote Control Signals; Deleting Button Functions One By One; Deleting All Settings For User - Panasonic PT-AE900U Operating Manual

Deleting home theatre equipment remote control signals

You can use either of two methods to delete remote control signals that have been
recorded (learnt): by deleting button functions one by one (DELETE), or by deleting all
settings for USER 1-3 (OPS RESET).
Note:
BIf device codes have already been entered for USER 1-3, the device codes
will not be deleted.
I Deleting button functions one by one (DELETE)
1 Press [SETUP] for 3 seconds or more.
2
Select "USER 1-3" and then press [ENTER].
3
Select "DELETE?" and then press [ENTER].
4 Press the button to be deleted.
( Example: When deleting the function of the
playback button
✱
If "ERROR" is displayed
"ERROR" will be displayed if no function has been learnt.
✱ To delete another button, repeat step 4.
To finish, press [SETUP].
14
(Example: When "USER1" is selected)
)
I Deleting all settings for USER 1-3 (OPS RESET)
1 Press [SETUP] for 3 seconds or more.
2
Select "USER 1-3" and then press [ENTER].
3
Select "OPS RESET?" and then press [ENTER].
4
Press [ENTER].
To finish, press [SETUP].
(Example: When "USER1" is selected)
15