Operation; Operating The Projector; Operating The Home Theatre System; Setting Remote Control Signals For Home Theatre Systems - Panasonic PT-AE900U Operating Manual

Operation

I Operating the projector
1
Press the button for the desired operation.
BIf operating home theatre system devices
I Operating the home theatre system
1
Press [SELECT].
2
Select the device to be operated and then
press [ENTER].
3
Press the button for the desired operation.
Note:
BAt the time of purchase, the remote control is programmed with remote
control signals for Panasonic products.
BIf the devices you are using cannot be operated by using the default settings,
refer to "Setting remote control signals for home theatre systems" (
BThe default settings for USER1-3 are for these settings to be empty.
BIf you do not press anything for 10 seconds or more during this procedure,
the LCD will switch off.
BIf the light is on, it will switch off if no operations are carried out for 10
seconds or more.
BIf the LCD switches off while a device is flashing as a result of a device
selection, the last device selected will be the one that can be operated.
6
When you press [PROJECTOR], operation will
switch from the home theatre system back to the
projector.
(Example: When "DVD" is selected)
(Example: When [PLAY] is selected)

Setting remote control signals for home theatre systems

This remote control is programmed with remote control signals for Panasonic products at
the time of purchase. If you would like to operate devices from other manufacturers, or if
your Panasonic products cannot be operated, the following setting operations will be
required.
Note:
B Do not use the learning function to record remote control signals from other
learning remote controls that have been learnt by those remote controls. If
this is done, operating errors may result.
B If no operations are carried out for 60 seconds or more during the setup
stage, operation will time out and the setting mode will be cancelled.
I Remote control signal learning methods
The following three remote control signal learning methods can be used.

Selecting and entering device codes

Select from the device code list.
Setting home theatre system devices when you
To learn remote control signals from devices that you do not
know the device code for, set using the search function.
Learning remote control signals directly from
If operation is not possible using a device code, you can
learn remote control signals directly from the home theatre
system device.
p.7)
If you would like to cancel a setting
before it is complete··
do not know the device code
home theatre system devices
Tip
Press [SETUP].
p.8
p.10
p.12
7