Table of Contents
Advertisement
1
Press OK. Select Settings.
2
Select
Tones
.
3
Select Volume.
4
Select Ring, Ramping, Keys,
5
Scroll up or down to adjust the settings. You can also use the numeric keys to set the
required audio level: pressing on
6
7
ume to
or
pressing on
for all others).
6
OK
Press
to validate the setting.
7
Select
Save
to store your setting.
During a call you can adjust the conversation volume level by using the up and down arrow
keys.
1. If the ring tone volume level is set to 0 the
2. Setting the key tones to 0 deactivates the key tones.
Ramping
Ramping is a feature that, when turned on, causes the incoming ring tone to gradually increase
to the maximum volume level if the call is not answered after the first ring.
1
Press OK. Select Settings.
2
Select Tones.
3
Select Volume.
4
Select Ramping.
5
Select On.
6
Save
Select
to store your setting.
Display
Idle screen
Themes can be changed to personalize your standby display.
To select a standby background image for your Idle screen:
1
Press OK. Select Settings.
2
Select Display.
3
Idle
screen.
Select
4
Select
My picture
4'
If
My picture
images (see "Pictures", page 55). The image may be too large ; a Crop screen is then displayed
(see "Cropping", page 57).
5
Save
Select
to store your setting.
1. The Urban theme changes twice a day: a night screen sets at 7 p.m., a day screen sets at 7 a.m.
2. The Meridian theme displays the origin and the secondary clocks.
3. You can also set your Idle screen image from the Pictures menu (see "Setting an image as a idle screen, a
welcome or a goodbye screen from the pictures folder", page 57).
4. The picture linked to the idle screen may be an animated GIF.
Welcome screen
At mobile switch on a Welcome screen shows before the standby screen is displayed. This
screen is a default one but it can be customised. You can indeed select any of the Pictures folder
images - see "Pictures", page 55.
1
Press OK. Select Settings.
2
Select Display.
3
Welcome
Select
4
Default
Select
among the stored images.
5
Save
Select
to store your setting.
You can also set the Welcome screen from the Pictures menu (see "Setting an image as a idle screen, a wel-
come or a goodbye screen from the pictures folder", page 57).
Conversation
sets the volume to 2, pressing on
sets the volume to the minimum value
or one of the five available background images.
is selected, select
Pictures
screen.
My
picture. Select
or scroll down to
or Alarm.
icon is displayed on the standby screen.
(left softkey) and choose one from the available
Pictures
Settings
68-
or
sets the vol-
(1
for the speech and
(left soft key) to choose one
0
Advertisement
Table of Contents
