Table of Contents
Advertisement
Content
The following screen is displayed (it allows you to edit your message pages):
Displayed symbols (upper part of the screen):
The previous page can be reached by pressing the left arrow key.
The next page can be reached by pressing the right arrow key.
One or several pages can be added next by pressing the right arrow key.
Estimated message size (displayed dynamically while composing the
message).
Current page number.
A melody is attached to the current page.
A speech note is attached to the current page.
The blue squared field shows the active field (Pictures or Text fields). Press the down arrow
key to scroll to the next field and select OK to edit it.
To attach an image
You can attach images to your Multimedia message. These images have to be .jpg, .gif (animated
or not animated), or .wbmp.
The size of the Multimedia messages you can send is operator dependent. However, by default,
the maximum size cannot exceed 50 kB.
1
When on the picture field press OK.
2
Select one of the available pictures from the list and press
to take a new picture.
The selected image is partly displayed in the picture field.
1. You can send any of the Pictures list images unless the file is copyright protected (the 'File protected' message
is then displayed).
2. The 'No picture' item from the Pictures list allows to delete the current page image.
3. 'Too many data for message sending' is displayed on image selection if its size exceeds the message sending
capacity.
To attach a melody or a speech note
You can attach melodies and speech notes to your Multimedia message.
The size of the Multimedia messages you can send is operator dependent. However the max-
imum size cannot exceed 50 kB.
1
When on the picture field or on the text field, select Options.
2
Add sound
Select
speech note in the displayed list.
The selected melody or speech note is attached to the message and the
1. You can send any of the Melodies or Speech notes unless the file is copyright protected (the 'File protected'
message is then displayed).
2. 'Too many data for message sending' is displayed on melody or speech note selection if its size exceeds the
message sending capacity.
To write text
1
Select the text field.
2
Type in your page text (240 characters per page max.): please see "Entering text", page 22.
Press
OK
or select
1.'Too many data for message sending' is displayed on text insertion if its size exceeds the message sending
capacity.
2. You can amend the Models text once you have selected one.
3. You cannot insert a Chinese text moded if your mobile edition mode is set to English.
Melodies
then select
or
Models
(left softkey), then choose one of the displayed messages.
30-
OK
or press
Speech
notes. Select the required melodies or
Multimedia Messages
Options
then
Camera
icon is displayed.
Advertisement
Table of Contents
