Using The Remote Control - Mitsubishi Electric HC910 User Manual

Using the remote control

Using the remote control
Operational range of the remote control
Front of projector
30˚ 30˚
Operate the remote
control within a distance
of 10 m from the projector,
pointing the light beam at
the remote control photo-
sensor (front or rear) of
the projector.
Reception angle
Vertical directions
Vertical directions (ceiling mount) Vertical directions (ceiling mount)
Rear of projector
30˚ 30˚
When operating the remote control, keep the distance When operating the remote control, keep the distance
from the remote control to the projector via the screen from the remote control to the projector via the screen
within about 5 m. The operable range of the remote within about 5 m. The operable range of the remote
control, however, depends on the characteristics of the control, however, depends on the characteristics of the
screen.
20°
10°
20 ˚
• Keep the remote control photo-sensor out of direct
sunlight or fl uorescent lamp light.
• Keep the remote control photo-sensor at least 2 m
away from fl uorescent lamps. Otherwise, the re-
mote control may malfunction.
• If there is an inverter-operated fl uorescent lamp
near the remote control, the remote control opera-
tion may become unstable.
20°
10°
20 ˚
EN-9