Using The Remote Control - Mitsubishi Electric HC3100U User Manual

Using the remote control

Operational range of the remote control
Front of projector
30° 30°
Operate the remote
control within a distance
of 10 m (30 feet) from the
projector, pointing the
IR beam at the remote
control photo-sensor
(front or rear) of the
projector.
Reception angle
Vertical directions
Vertical directions (ceiling mount)
Rear of projector
30° 30°
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m (6 feet). The operable range of the
remote control, however, depends on the characteristics
of the screen.
20°
10°
20˚
• Keep the remote control photo-sensor out of direct
sunlight or fluorescent lamp light.
• Keep the remote control photo-sensor at least 2 m
(6 feet) away from fluorescent lamps. Otherwise,
the remote control may malfunction.
• If there is an inverter-operated fluorescent lamp
near the remote control, the remote control opera-
tion may become unstable.
• When you use the remote control too close to the
remote control sensor, the remote control may not
work correctly.
20°
10°
20˚
EN-9