Specifi Cations - Mitsubishi Electric HC910 User Manual

Specifi cations Specifi cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum number of display colors
Maximum
resolution
Computer input
Video input
Control terminal/Others
Operating temperatures
Rated voltage
Power consumption
Dimensions
Weight
Others Others
Replacement part
(Option / Not included in the box)
Spare lamp
EN-36
DLP™ projector
HC910
0.65-inch Single chip DMD (Aspect ratio 16:9)
Pixel 1024 x 576 = 589824 pixels
F 2.4 - 2.6 f= 23 - 27.6 mm
200 W
40" min. to 275" max. (Projection distance 1.3 to 10 m)
16770000 (full-color display)
Computer signal Maximum resolution : 1280 x 1024 dots (Analog) / compressed
Panel resolution : 1024 x 576 dots
Video signal
NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
480i, 480p, 576i, 576p, 720p, 1080i
Component
signal
Panel resolution : 1024 x 576 dots
[Signal type]
Analog RGB
Digital RGB
[Signal type]
Video input
S-Video input
Component video input
RS-232C (8-pin)
+41°F (+5°C) to +95°F (+35°C)
AC100 - 240V, 50/60Hz
2.9 A
310 mm (W) x 100 mm (H) x 245 mm (D) 310 mm (W) x 100 mm (H) x 245 mm (D)
2.9 kg
S-video input
Luminance signal : Vp-p=1.0 V 75Ω (negative sync)
Chrominance signals : Vp-p=0.286 V 75Ω (burst signal) Chrominance signals : Vp-p=0.286 V 75Ω (burst signal)
Video input Vp-p=1.0 V 75Ω (negative sync)
Component video YC C
B
input
Vp-p=0.7 V 75Ω (C
Analog input
RGB : Vp-p=0.7 V 75Ω (negative sync)
YC C
B R
HD/CS : TTL-level (negative or positive polarity)
VD : TTL-level (negative or positive polarity)
Digital input (DVI) DVI interface (TMDS single link)
499B042-30 (VLT-HC910LP)
[Terminal type]
D-SUB 15P
DVI
[Terminal type]
RCA
S
RCA
: Vp-p=1.0 V 75Ω (Y) (negative sync)
R
, C )
B R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
[Line]
1
1
[Line]
1
1
1
* Not included protrusion. * Not included protrusion.
, C )
B R