Connecting To A Dvd Player - Mitsubishi Electric HC910 User Manual

Connecting to a video player, etc.
COMPONENT VIDEO IN
S-VIDEO IN
VIDEO IN
S-video cable S-video cable
1
To S-VIDEO
IN terminal
COMPONENT VIDEO IN
S-VIDEO IN
VIDEO IN
• Also read the instruction manual of the equipment to be connected.
• Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of No Signal
may appear on the screen when you change the channel via any channel that is not being received. In such a case,
set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip
function (that is a function not to display channels that are not being received) enabled.

Connecting to a DVD player

To connect this projector to video equipment that has component video output terminals, such as a DVD player, use
the COMPONENT terminals.
P /C P /C
R R B
DVD player
• Images may not be projected correctly depending on the type of the DVD player you use.
• Though it may take some time before an image is displayed on the screen depending on the type of the input
signal, such symptom is not a malfunction.
Video player, or the like
2
To video out- To video out-
put terminal put terminal
To VIDEO
1
IN terminal
Video cable
Video player, or the like
To S-video output
2
terminal
Y
B
1. Connect one end of the optional video cable to the VIDEO
IN terminal of the projector.
2. Connect the other end of the video cable to the video
output terminal of the video equipment.
When the video equipment is equipped with the S-video
output terminal, make the connection as follows.
1. Connect one end of the optional S-video cable to the
S-VIDEO IN terminal of the projector.
2. Connect the other end of the S-video cable to the S-video
output terminal of the video equipment.
Component cable (Option)
Y
P /C
B B
P /C
R R
COMPONENT VIDEO IN
S-VIDEO IN
VIDEO IN
EN-13